Merge branch 'main' of github.com:erik-toth/audio-synth

Changed mapping behaveiour of seqeuncer blocks.

dev/analog/ETOTH-TRI-SQR-VCO_OTA_SS/Project Outputs for TRI-SQR-VCO_OTA_SS/Status Report.Txt

@@ -7,4 +7,4 @@ From  : Project [TRI-SQR-VCO_OTA_SS.PrjPcb]
 Files Generated   : 1
 Documents Printed : 0
 
-Finished Output Generation At 14:24:51 On 11.12.2025
+Finished Output Generation At 14:45:26 On 03.02.2026

dev/analog/ETOTH-TRI-SQR-VCO_OTA_SS/Project Outputs for TRI-SQR-VCO_OTA_SS/TRI-SQR-VCO_OTA_SS.nsx

@@ -1,5 +1,5 @@
 TRI-SQR-VCO_OTA_SS
-*SPICE Netlist generated by Advanced Sim server on 12.12.2025 14:46:42
+*SPICE Netlist generated by Advanced Sim server on 03.02.2026 15:26:41
 .options MixedSimGenerated
 
 *Schematic Netlist:
@@ -22,38 +22,30 @@ XIC3B U_SAW NetIC3_6 VAP 0 NetIC3_7 TL074
 XIC3C VCM NetIC3_9 VAP 0 U_C TL074
 XIC3D VCM NetIC3_13 VAP 0 U_CV TL074
 XIC4A R.VMID NetIC4_1 VAP 0 NetIC4_1 TL074
-RPTC NetPTC_1 U_C 1k
 RR2 0 U_TRI 20k
 RR3 VAP NetIC1_1 15k
 RR4a NetIC3_2 U_TRI 200k
 RR4b U_in NetIC3_2 100k
 RR_Aa NetR_Aa_1 U_SQR_OTA 3.3k
 RR_Ab VCM NetR_Aa_1 330R
-RR_CV_a NetR_CV_a_1 U_CV 120k
-RR_CV_b NetR_CV_b_1 NetR_CV_a_1 6.8k
-RR_CV_c NetR_CV_b_1 NetIC3_9 820R
+RR_COARSEA 0 NetR_COARSE_2 {100k * {COARSE}}
+RR_COARSEB NetR_COARSE_2 VAP {100k - (100k * {COARSE})}
+RR_CV_a NetIC3_9 U_C 1k
+RR_CV_b NetR_COARSE_2 NetIC3_9 47k
+RR_CV_c U_CV NetIC3_9 47k
+RR_CV_d NetIC3_9 NetR_CV_d_2 1Meg
 RR_E NetC_an_2 NetR_E_2 10k
+RR_FINEA 0 NetR_CV_d_2 {100k * {FINE}}
+RR_FINEB NetR_CV_d_2 VAP {100k - (100k * {FINE})}
 RR_inv_a NetIC2_8 NetIC3_13 10k
 RR_inv_b NetIC3_13 U_CV 10k
-RR_lambda_T_a NetIC3_9 NetR_lambda_T_a_2 1.2k
-RR_lambda_T_b NetR_lambda_T_a_2 NetPTC_1 100R
 RR_off_b NetIC2_9 NetIC2_8 10k
-RR_off_c_+0 VAP NetR_off_c_+0_2 10k
-RR_off_c_+1A VAP NetR_off_c_+1_2 {8330R * 0.5}
-RR_off_c_+1B NetR_off_c_+1_2 NetR_off_c_+1_2 {8330R - (8330R * 0.5)}
-RR_off_c_+1_vor VAP NetR_off_c_+1_vor_2 10k
-RR_off_c_+2A VAP NetR_off_c_+2_2 {7150R * 0.5}
-RR_off_c_+2B NetR_off_c_+2_2 NetR_off_c_+2_2 {7150R - (7150R * 0.5)}
-RR_off_c_-1A NetR_off_c_+1_vor_2 NetR_off_c_-1_2 {2.5k * 0.5}
-RR_off_c_-1B NetR_off_c_-1_2 NetR_off_c_-1_2 {2.5k - (2.5k * 0.5)}
 RR_off_c_sim VAP NetIC2_9 10k
 RR_off_d NetR_off_d_1 NetIC2_9 10k
 RR_POT_refA 0 NetR_POT_ref_2 {100k * 0.5}
 RR_POT_refB NetR_POT_ref_2 NetR_POT_ref_2 {100k - (100k * 0.5)}
 RR_POT_SAWA 0 0 {10k * 0.5}
 RR_POT_SAWB 0 NetR_POT_SAW_3 {10k - (10k * 0.5)}
-RR_POT_uC_compA 0 NetR_POT_uC_comp_2 {100k * {Q}}
-RR_POT_uC_compB NetR_POT_uC_comp_2 VAP {100k - (100k * {Q})}
 RR_PWM_a1 NetR_POT_SAW_3 NetIC3_6 10k
 RR_PWM_a2 NetR_POT_SAW_3 NetIC3_6 10k
 RR_PWM_b NetIC3_6 VAP 10k
@@ -67,7 +59,6 @@ RR_SAW_b NetIC2_12 U_in 10k
 RR_SAW_c U_SAW NetIC2_13 10k
 RR_SAW_e U_SQR fet_gate 33k
 RR_SAW_f 0 fet_gate 100k
-RR_uC_comp NetIC3_9 NetR_POT_uC_comp_2 1Meg
 RRoff_a NetIC3_2 0 1Meg
 RRoff_b NetIC3_2 0 1Meg
 XT1 VCM NetC_an_2 NetC_an_1 U_C NetC_an_2 NetT1_6 DMMT3906W
@@ -96,7 +87,8 @@ SWEEP U_var LIST 0 1 2
 .ENDC
 
 *Global Parameters:
-.PARAM Q=0.5
+.PARAM COARSE={0.50}
+.PARAM FINE={0.3}
 
 *Models and Subcircuits:
 * A dual opamp ngspice model

dev/analog/Filter_Test/Project Outputs for Filter_Test/Filter_Test.nsx

@@ -1,5 +1,5 @@
 Filter_Test
-*SPICE Netlist generated by Advanced Sim server on 21.12.2025 21:14:32
+*SPICE Netlist generated by Advanced Sim server on 06.02.2026 11:30:06
 .options MixedSimGenerated
 
 *Schematic Netlist:
@@ -50,22 +50,24 @@ RR_hilfe2 NetIC2_2 NetIC2_1 100k
 VU_mess_abc NetIC3_16 NetR_abc_2 0
 VU_mess_abc1 NetIC1_16 NetR_abc_2 0
 VU_mess_abc2 NetIC1_1 NetR_abc_2 0
-VUe Uin VCM DC 0 SIN(0 3V 440Hz 0 0 0) AC 1 0
+VUe Uin VCM DC 0 SIN(0 0 440Hz 0 0 0) AC 1 0
 VUneg VCM 0 +5V
 VUpos VAP VCM +5V
 
-.PLOT AC {dB(v(BP))} =PLOT(1) =AXIS(1) =NAME(Au_Uout) =UNITS(dB)
-.PLOT AC {dB(v(LP))} =PLOT(2) =AXIS(1) =NAME(Au_Uout2) =UNITS(dB)
-.PLOT AC {dB(v(HP))} =PLOT(3) =AXIS(1) =NAME(Au_HP) =UNITS(dB)
+.PLOT TRAN {v(div)} =PLOT(2) =AXIS(1) =NAME(div) =UNITS(V)
+.PLOT TRAN {i(U_mess_abc1)} =PLOT(3) =AXIS(1) =NAME(I_ABC1) =UNITS(A)
+.PLOT TRAN {i(U_mess_abc2)} =PLOT(3) =AXIS(1) =NAME(I_ABC2) =UNITS(A)
+.PLOT TRAN {i(U_mess_abc3)} =PLOT(3) =AXIS(1) =NAME(I_ABC3) =UNITS(A)
+.PLOT TRAN {v(Uin)} =PLOT(1) =AXIS(1) =NAME(U_E) =UNITS(V)
 
 *Selected Circuit Analyses:
-.AC DEC 50 20 20k
+.TRAN 90.91u 11.36m 0 90.91u
 .CONTROL
 SWEEP Q LIST 0.002 0.01 0.1 1
 .ENDC
 
 *Global Parameters:
-.PARAM Q=0.1
+.PARAM Q={0.1}
 
 *Models and Subcircuits:
 * A dual opamp ngspice model

dev/analog/Filter_Test/Project Outputs for Filter_Test/Status Report.Txt

@@ -0,0 +1,10 @@
+Output: Mixed Sim
+Type  : AdvSimNetlist
+From  : Project [Filter_Test.PrjPcb]
+   Generated File[Filter_Test.nsx]
+
+
+Files Generated   : 1
+Documents Printed : 0
+
+Finished Output Generation At 11:26:55 On 06.02.2026

dev/analog/VCA_LM13700/Project Outputs for VCA_LM13700/Status Report.Txt

@@ -7,4 +7,4 @@ From  : Project [VCA_LM13700.PrjPcb]
 Files Generated   : 1
 Documents Printed : 0
 
-Finished Output Generation At 13:07:34 On 14.12.2025
+Finished Output Generation At 11:31:57 On 06.02.2026

dev/analog/VCA_LM13700/Project Outputs for VCA_LM13700/VCA_LM13700.nsx

@@ -1,5 +1,5 @@
 VCA_LM13700
-*SPICE Netlist generated by Advanced Sim server on 14.12.2025 13:07:43
+*SPICE Netlist generated by Advanced Sim server on 06.02.2026 11:37:11
 .options MixedSimGenerated
 
 *Schematic Netlist:
@@ -13,16 +13,19 @@ XIC1E NetIC1_16 NetIC1_15 NetIC1_14 NetIC1_13 OUT 0 OUT Uout ExtraNet_XIC1E_9
 + ExtraNet_XIC1E_10 VAP ExtraNet_XIC1E_12 ExtraNet_XIC1E_13 ExtraNet_XIC1E_14
 + ExtraNet_XIC1E_15 ExtraNet_XIC1E_16 LM13700-DUAL
 RR1 NetIC1_14 IN 3.3k
-RR2 OUT VCM 27k
+RR2a OUT NetR2a_2 20k
+RR2b NetR2a_2 VCM 6.8k
 RR3 Uout 0 5.1k
 RR4 VCM NetIC1_14 1.2k
 RR5 VCM NetIC1_13 1.2k
 RR_B NetR_B_1 NetR_B_2 100k
 RR_BASE_GAIN NetIC1_16 NetR_BASE_GAIN_2 10k
 RR_D VAP NetIC1_15 5.1k
-QT VAP NetR_B_1 NetR_BASE_GAIN_2 QBC547B
+RR_GAINA NetR_BASE_GAIN_2 NetR_BASE_GAIN_2 {100k * {GAIN}}
+RR_GAINB NetR_BASE_GAIN_2 U_ABC {100k - (100k * {GAIN})}
+QT VAP NetR_B_1 U_ABC QBC547B
 VU_VCO_EN NetR_B_2 0 DC 0 PULSE(3.3 0 0 4u 1u 20m 40m) AC 1 0
-VUin IN VCM DC 0 SIN(0 2V 440Hz 0 0 0) AC 1 0
+VUin IN VCM DC 0 SIN(0 0 440Hz 0 0 0) AC 1 0
 VUneg VCM 0 +5V
 VUpos VAP VCM +5V
 
@@ -34,6 +37,7 @@ VUpos VAP VCM +5V
 .PLOT TRAN {i(R5)} =PLOT(6) =AXIS(1) =NAME(I_5) =UNITS(A)
 .PLOT TRAN {i(R4)} =PLOT(6) =AXIS(1) =NAME(I_4) =UNITS(A)
 .PLOT TRAN {2*(v(Uout)*0.663)} =PLOT(2) =AXIS(1) =NAME(Uout_buffer) =UNITS(V)
+.PLOT TRAN {v(U_ABC)} =PLOT(7) =AXIS(1) =NAME(U_ABC) =UNITS(V)
 
 .OPTIONS METHOD=GEAR MAXORD=2
 *Selected Circuit Analyses:

dev/digital/Firmware_TEST/include/FIRMWARE_DEF.h

@@ -3,7 +3,7 @@
     @author:    Erik Tóth
     @contact:   etoth@tsn.at
     @date:      2025-10-26
-    @updated:   2025-12-06
+    @updated:   2026-03-08
     @brief:     Header for constant definitions
 */
 
@@ -12,38 +12,38 @@
 #include <Arduino.h>
 #include <Wire.h>
 // CONSTANTS DEFINITONS
-#define N_KEYBOARD_ROW  5   // for PROD. change to 5
-#define N_KEYBOARD_COL  5   // for PROD. change to 5
-#define N_CV_GATES      2   // PROD. OK
-#define N_SB            2   // PROD. OK
+#define N_KEYBOARD_ROW  5
+#define N_KEYBOARD_COL  5
+#define N_CV_GATES      2
+#define N_SB            2
 #define BAUDRATE        115200
 #define N_MAX_SEQ_STEPS 512
 // PIN DEFENTITIONS
 // I2C PINS
-#define PIN_SDA         15 // PROD. pin OK
-#define PIN_SCL         16 // PROD. pin OK
+#define PIN_SDA         15 
+#define PIN_SCL         16 
 // KEYBOARD PINS
-#define PIN_K_R0        7  // PROD. pin OK
-#define PIN_K_R1        8  // PROD. pin OK
-#define PIN_K_R2        9  // PROD. pin OK
-#define PIN_K_R3        10 // PROD. pin OK
-#define PIN_K_R4        11 // DEV. not in use - PROD. pin OK
-#define PIN_K_C0        1  // PROD. pin OK
-#define PIN_K_C1        2  // PROD. pin OK
-#define PIN_K_C2        4  // PROD. pin OK
-#define PIN_K_C3        5  // DEV. not in use - PROD. pin OK
-#define PIN_K_C4        6  // DEV. not in use - PROD. pin OK
+#define PIN_K_R0        7  
+#define PIN_K_R1        8  
+#define PIN_K_R2        9  
+#define PIN_K_R3        10 
+#define PIN_K_R4        11 
+#define PIN_K_C0        1  
+#define PIN_K_C1        2  
+#define PIN_K_C2        4  
+#define PIN_K_C3        5  
+#define PIN_K_C4        6  
 // SEQUENCER BUTTON PINS
-#define PIN_SB_1_REC    33 // for PROD. change to 33 / not available on dev board
-#define PIN_SB_1_PLAY   34 // for PROD. change to 34 / not available on dev board
-#define PIN_SB_2_REC    35 // 35
-#define PIN_SB_2_PLAY   36 // 36
+#define PIN_SB_1_REC    33 
+#define PIN_SB_1_PLAY   34 
+#define PIN_SB_2_REC    35 
+#define PIN_SB_2_PLAY   36 
 // MISC/INFO PINS
-#define PIN_VCO1_EN     37 // PROD. pin 37 TODO: if there is an active key mapped to CV-Gate 1 --> HIGH
-#define PIN_VCO2_EN     38 // PROD. pin 38 TODO: if there is an active key mapped to CV-Gate 2 --> HIGH
-#define PIN_REC         39 // PROD. pin 39 TODO: if any sb is recording LED on (active-low)
-#define PIN_BPM         12 // PROD. pin 12 TODO: get bpm through potentiometer analog value -> ADC-Pin
-#define PIN_B_METRONOME 13 // PROD. pin 13 TODO: button activates/deactivates bpm led output (pull-up)
-#define PIN_L_METRONOME 14 // PROD. pin 14 TODO: led blinks according to bpm value (active-low)
+#define PIN_VCO1_EN     38 
+#define PIN_VCO2_EN     39 
+#define PIN_REC         37 
+#define PIN_BPM         12 
+#define PIN_B_METRONOME 14 
+#define PIN_L_METRONOME 13 
 
 #endif

dev/digital/Firmware_TEST/src/FIRMWARE.cpp

@@ -3,13 +3,13 @@
     @author:    Erik Tóth
     @contact:   etoth@tsn.at
     @date:      2025-10-26
-    @updated:   2025-12-06
-    @brief:     Firmware für MCU - FIXED VERSION mit Bounds Checks
+    @updated:   2026-03-08
+    @brief:     Firmware für MCU
 */
 
 #include "FIRMWARE.h"
 
-// ==================== Helper-Functions ====================
+// Helper-Functions
 
 bool isNotKey(Key k)
 {
@@ -23,7 +23,7 @@ bool isEqualKey(Key k1, Key k2)
     else return false;
 }
 
-// ==================== Keyboard ====================
+// Keyboard 
 
 Keyboard::Keyboard(uint8_t nRows, uint8_t nCols, uint8_t *pinsRow, uint8_t *pinsCol)
 {
@@ -178,7 +178,7 @@ void Keyboard::_removeActiveKey(uint8_t row, uint8_t col)
     }
 }
 
-// ==================== CV ====================
+//  CV 
 
 CV::CV(Adafruit_MCP4728 *dac, TwoWire *wire, uint8_t nCV, MCP4728_channel_t *cvChannelMap, uint16_t *keyToVoltage, uint8_t row, uint8_t col)
 {
@@ -209,7 +209,7 @@ void CV::setVoltage(uint8_t cvIndex, uint16_t mV)
 {
     if(cvIndex >= _nCV) return;
     MCP4728_channel_t ch = _cvChannelMap[cvIndex];
-    _dac->setChannelValue(ch, map(mV, 0, 2048, 0, 4095), MCP4728_VREF_INTERNAL);
+    _dac->setChannelValue(ch, map(mV, 0, 2048, 0, 4095), MCP4728_VREF_INTERNAL, MCP4728_GAIN_1X);
 }
 
 void CV::setVoltage(uint8_t cvIndex, Key k)
@@ -234,7 +234,7 @@ uint8_t CV::_getKeyToVoltageIndex(Key k)
     return (k.row*_col + k.col); 
 }
 
-// ==================== SequencerBlock (FIXED) ====================
+//  SequencerBlock
 
 /*!
 *   @param maxDurationMS maximum loop duration of recording in milliseconds
@@ -255,7 +255,7 @@ SequencerBlock::SequencerBlock(uint16_t maxDurationMS, uint16_t maxStepCount)
     _lastStepTime = 0;
     _playStartTime = 0;
     _stepStartTime = 0;
-    _lastAddStepTime = 0;  // NEU: Rate-Limiting
+    _lastAddStepTime = 0;
 }
 
 void SequencerBlock::startRecord()
@@ -266,7 +266,7 @@ void SequencerBlock::startRecord()
     _isRecording = true;
     _recordStartTime = millis();
     _lastStepTime = _recordStartTime;
-    _lastAddStepTime = _recordStartTime;  // NEU
+    _lastAddStepTime = _recordStartTime;
     _lastVoltageCh1 = 0xFFFF;
     _lastVoltageCh2 = 0xFFFF;
 }
@@ -281,10 +281,8 @@ void SequencerBlock::stopRecord()
 
 void SequencerBlock::addStep(uint16_t voltage_ch1, uint16_t voltage_ch2)
 {
-    // KRITISCHE SICHERHEITSPRÜFUNGEN ZUERST
     if(!_isRecording) return;
     
-    // Prüfe ob wir überhaupt noch Platz haben (mit Sicherheitsabstand!)
     if(_stepCount >= _MAX_SEQUENCE_STEPS - 1) 
     {
         Serial.println("\n\r[ERROR] Step limit reached! Stopping recording.");
@@ -301,19 +299,16 @@ void SequencerBlock::addStep(uint16_t voltage_ch1, uint16_t voltage_ch2)
     
     unsigned long now = millis();
     
-    // NEU: Rate-Limiting - ignoriere zu häufige Aufrufe
     if((unsigned long)(now - _lastAddStepTime) < 5)
     {
         return;
     }
     _lastAddStepTime = now;
     
-    // Hat sich die Spannung geändert?
     bool voltageChanged = (voltage_ch1 != _lastVoltageCh1) || (voltage_ch2 != _lastVoltageCh2);
     
     if(voltageChanged)
     {
-        // WICHTIG: Prüfe nochmal ob wir Platz haben BEVOR wir schreiben!
         if(_stepCount >= _MAX_SEQUENCE_STEPS - 1)
         {
             Serial.println("\n\r[ERROR] Array full! Stopping recording.");
@@ -321,19 +316,17 @@ void SequencerBlock::addStep(uint16_t voltage_ch1, uint16_t voltage_ch2)
             return;
         }
         
-        // Vorherigen Step abschließen (wenn vorhanden)
         if(_stepCount > 0 && _stepCount <= _MAX_SEQUENCE_STEPS)
         {
             _finishCurrentStep();
         }
         
-        // Neuen Step beginnen - mit Bounds Check!
         if(_stepCount < _MAX_SEQUENCE_STEPS)
         {
             _sequence[_stepCount].voltage_ch1 = voltage_ch1;
             _sequence[_stepCount].voltage_ch2 = voltage_ch2;
             _sequence[_stepCount].duration = 0;
-            _sequence[_stepCount].active = (voltage_ch1 > 0 || voltage_ch2 > 0);  // NEU: Prüfe ob Note aktiv
+            _sequence[_stepCount].active = (voltage_ch1 > 0 || voltage_ch2 > 0);
             _stepCount++;
             
             _lastStepTime = now;
@@ -343,8 +336,6 @@ void SequencerBlock::addStep(uint16_t voltage_ch1, uint16_t voltage_ch2)
     }
     else
     {
-        // Gleiche Spannung - Duration des aktuellen Steps aktualisieren
-        // WICHTIG: Bounds Check!
         if(_stepCount > 0 && _stepCount <= _MAX_SEQUENCE_STEPS)
         {
             _sequence[_stepCount - 1].duration = now - _lastStepTime;
@@ -378,7 +369,6 @@ void SequencerBlock::update()
 {
     if(!_isPlaying || _stepCount == 0) return;
     
-    // WICHTIG: Bounds Check BEVOR wir auf Array zugreifen!
     if(_currentStep >= _stepCount || _currentStep >= _MAX_SEQUENCE_STEPS)
     {
         Serial.println("\n\r[ERROR] Invalid step index in update()!");
@@ -389,7 +379,6 @@ void SequencerBlock::update()
     unsigned long now = millis();
     unsigned long elapsed = now - _stepStartTime;
     
-    // Sicherung gegen Division durch Null / Endlosschleife
     if(_sequence[_currentStep].duration == 0)
     {
         _currentStep++;
@@ -409,12 +398,10 @@ void SequencerBlock::update()
         return;
     }
     
-    // Prüfen ob aktueller Schritt abgelaufen ist
     if(elapsed >= _sequence[_currentStep].duration)
     {
         _currentStep++;
         
-        // Sequenz-Ende erreicht?
         if(_currentStep >= _stepCount)
         {
             if(_loop)
@@ -447,7 +434,6 @@ void SequencerBlock::clear()
     _lastVoltageCh1 = 0;
     _lastVoltageCh2 = 0;
     
-    // Optional: Array löschen (kann je nach Use-Case weggelassen werden)
     for(uint16_t i = 0; i < _MAX_SEQUENCE_STEPS; i++)
     {
         _sequence[i].voltage_ch1 = 0;
@@ -500,7 +486,7 @@ uint16_t SequencerBlock::getCurrentVoltageCh2()
 
 uint16_t SequencerBlock::getTotalDuration()
 {
-    uint32_t total = 0;  // uint32 um Overflow zu vermeiden
+    uint32_t total = 0;
     for(uint16_t i = 0; i < _stepCount && i < _MAX_SEQUENCE_STEPS; i++)
     {
         total += _sequence[i].duration;
@@ -519,7 +505,7 @@ bool SequencerBlock::isCurrentStepActive()
 void SequencerBlock::_finishCurrentStep()
 {
     if(_stepCount == 0) return;
-    if(_stepCount > _MAX_SEQUENCE_STEPS) return;  // Sicherheitsprüfung
+    if(_stepCount > _MAX_SEQUENCE_STEPS) return;
     
     unsigned long now = millis();
     uint16_t duration = now - _lastStepTime;

dev/digital/Firmware_TEST/src/main.cpp

@@ -1,11 +1,21 @@
 /*
-*     Example Code Three - Dual Channel Sequencer (COMPLETE)
-*     - Alle TODOs implementiert
-*     - VCO Gates, Recording LED, Metronome
+*   Analoger Audiosynthesizer mit digitaler Steuereinheit
+*   Firmware-Code für die digitale Einheit
+*   Autor: Erik Tóth
 */
 #include "FIRMWARE_DEF.h"
 #include "FIRMWARE.h"
 
+// Calibration table for optimal note accurarcy
+const uint16_t NOTE_MV[25] = {
+      64,  140,  216,  293,  369,
+     445,  521,  597,  673,  750,
+     826,  902,  978, 1054, 1131,
+    1207, 1283, 1359, 1435, 1511,
+    1588, 1664, 1740, 1816, 1892,
+};
+#define HLFSTEP(n) NOTE_MV[n]
+
 byte pins_keyboard_row[N_KEYBOARD_ROW] = {PIN_K_R0, PIN_K_R1, PIN_K_R2, PIN_K_R3, PIN_K_R4};
 byte pins_keyboard_col[N_KEYBOARD_COL] = {PIN_K_C0, PIN_K_C1, PIN_K_C2, PIN_K_C3, PIN_K_C4};
 
@@ -14,15 +24,16 @@ Keyboard keyboard(N_KEYBOARD_ROW, N_KEYBOARD_COL, pins_keyboard_row, pins_keyboa
 Adafruit_MCP4728 MCP4728;
 MCP4728_channel_t cvMap[N_CV_GATES] = {MCP4728_CHANNEL_A, MCP4728_CHANNEL_B};
 uint16_t keyToVoltage[N_KEYBOARD_ROW*N_KEYBOARD_COL] = {
-    1*83,  6*83,  11*83, 16*83, 21*83,
-    2*83,  7*83,  12*83, 17*83, 22*83,
-    3*83,  8*83,  13*83, 18*83, 23*83,
-    4*83,  9*83,  14*83, 19*83, 24*83,
-    5*83,  10*83, 15*83, 20*83, 25*83
+    HLFSTEP(0),  HLFSTEP(1),  HLFSTEP(2),  HLFSTEP(3),  HLFSTEP(4),
+    HLFSTEP(5),  HLFSTEP(6),  HLFSTEP(7),  HLFSTEP(8),  HLFSTEP(9),
+    HLFSTEP(10), HLFSTEP(11), HLFSTEP(12), HLFSTEP(13), HLFSTEP(14),
+    HLFSTEP(15), HLFSTEP(16), HLFSTEP(17), HLFSTEP(18), HLFSTEP(19),
+    HLFSTEP(20), HLFSTEP(21), HLFSTEP(22), HLFSTEP(23), HLFSTEP(24)
 };
 
 CV cv(&MCP4728, &Wire, N_CV_GATES, cvMap, keyToVoltage, N_KEYBOARD_ROW, N_KEYBOARD_COL);
 
+// SB1 -> VCO1 (CV-Channel 0), SB2 -> VCO2 (CV-Channel 1)
 SequencerBlock sb1(30000, N_MAX_SEQ_STEPS);
 SequencerBlock sb2(30000, N_MAX_SEQ_STEPS);
 
@@ -43,12 +54,16 @@ const unsigned long DEBOUNCE_DELAY = 50;
 
 static bool seq1_loop_active = false;
 static bool seq2_loop_active = false;
-static uint16_t last_voltage_ch1 = 0xFFFF;
-static uint16_t last_voltage_ch2 = 0xFFFF;
+
+// Separate last-voltage tracking per sequencer
+static uint16_t sb1_last_voltage_ch1 = 0xFFFF;
+static uint16_t sb1_last_voltage_ch2 = 0xFFFF;
+static uint16_t sb2_last_voltage_ch1 = 0xFFFF;
+static uint16_t sb2_last_voltage_ch2 = 0xFFFF;
 
 bool readButton(byte pin, ButtonState &state)
 {
-    bool reading = digitalRead(pin) == LOW;
+    bool reading = digitalRead(pin) == HIGH;
     bool buttonPressed = false;
     
     if(reading != state.last)
@@ -74,11 +89,11 @@ bool readButton(byte pin, ButtonState &state)
 
 void initButtons()
 {
-    pinMode(PIN_SB_1_REC, INPUT_PULLUP);
-    pinMode(PIN_SB_1_PLAY, INPUT_PULLUP);
-    pinMode(PIN_SB_2_REC, INPUT_PULLUP);
-    pinMode(PIN_SB_2_PLAY, INPUT_PULLUP);
-    pinMode(PIN_B_METRONOME, INPUT_PULLUP);
+    pinMode(PIN_SB_1_REC, INPUT_PULLDOWN);
+    pinMode(PIN_SB_1_PLAY, INPUT_PULLDOWN);
+    pinMode(PIN_SB_2_REC, INPUT_PULLDOWN);
+    pinMode(PIN_SB_2_PLAY, INPUT_PULLDOWN);
+    pinMode(PIN_B_METRONOME, INPUT_PULLDOWN);
     
     btn_sb1_rec.current = false;
     btn_sb1_rec.last = false;
@@ -123,26 +138,24 @@ void initOutputs()
 
 void handleSequencerButtons()
 {
-    // ===== Sequencer 1 Record Button =====
     if(readButton(PIN_SB_1_REC, btn_sb1_rec))
     {
         if(sb1.isRecording())
         {
             sb1.stopRecord();
-            Serial.printf("\n\r[SEQ1] Recording stopped. Steps: %i, Duration: %ims", 
+            Serial.printf("\n\r[SEQ1->VCO1] Recording stopped. Steps: %i, Duration: %ims", 
                          sb1.getStepCount(), sb1.getTotalDuration());
         }
         else
         {
             if(sb1.isPlaying()) sb1.stopPlay();
             sb1.startRecord();
-            last_voltage_ch1 = 0xFFFF;
-            last_voltage_ch2 = 0xFFFF;
-            Serial.printf("\n\r[SEQ1] Recording started (2 channels)...");
+            sb1_last_voltage_ch1 = 0xFFFF;
+            sb1_last_voltage_ch2 = 0xFFFF;
+            Serial.printf("\n\r[SEQ1->VCO1] Recording started...");
         }
     }
     
-    // ===== Sequencer 1 Play Button =====
     if(readButton(PIN_SB_1_PLAY, btn_sb1_play))
     {
         if(!sb1.isPlaying())
@@ -151,43 +164,41 @@ void handleSequencerButtons()
             sb1.setLoop(false);
             seq1_loop_active = false;
             sb1.startPlay();
-            Serial.printf("\n\r[SEQ1] Playback started (single)\n\r\tSteps: %i, Duration: %ims", 
+            Serial.printf("\n\r[SEQ1->VCO1] Playback started (single)\n\r\tSteps: %i, Duration: %ims", 
                          sb1.getStepCount(), sb1.getTotalDuration());
         }
         else if(!seq1_loop_active)
         {
             sb1.setLoop(true);
             seq1_loop_active = true;
-            Serial.printf("\n\r[SEQ1] Loop activated");
+            Serial.printf("\n\r[SEQ1->VCO1] Loop activated");
         }
         else
         {
             sb1.stopPlay();
             seq1_loop_active = false;
-            Serial.printf("\n\r[SEQ1] Playback stopped");
+            Serial.printf("\n\r[SEQ1->VCO1] Playback stopped");
         }
     }
     
-    // ===== Sequencer 2 Record Button =====
     if(readButton(PIN_SB_2_REC, btn_sb2_rec))
     {
         if(sb2.isRecording())
         {
             sb2.stopRecord();
-            Serial.printf("\n\r[SEQ2] Recording stopped. Steps: %i, Duration: %ims", 
+            Serial.printf("\n\r[SEQ2->VCO2] Recording stopped. Steps: %i, Duration: %ims", 
                          sb2.getStepCount(), sb2.getTotalDuration());
         }
         else
         {
             if(sb2.isPlaying()) sb2.stopPlay();
             sb2.startRecord();
-            last_voltage_ch1 = 0xFFFF;
-            last_voltage_ch2 = 0xFFFF;
-            Serial.printf("\n\r[SEQ2] Recording started (2 channels)...");
+            sb2_last_voltage_ch1 = 0xFFFF;
+            sb2_last_voltage_ch2 = 0xFFFF;
+            Serial.printf("\n\r[SEQ2->VCO2] Recording started...");
         }
     }
     
-    // ===== Sequencer 2 Play Button =====
     if(readButton(PIN_SB_2_PLAY, btn_sb2_play))
     {
         if(!sb2.isPlaying())
@@ -196,20 +207,20 @@ void handleSequencerButtons()
             sb2.setLoop(false);
             seq2_loop_active = false;
             sb2.startPlay();
-            Serial.printf("\n\r[SEQ2] Playback started (single)\n\r\tSteps: %i, Duration: %ims", 
+            Serial.printf("\n\r[SEQ2->VCO2] Playback started (single)\n\r\tSteps: %i, Duration: %ims", 
                          sb2.getStepCount(), sb2.getTotalDuration());
         }
         else if(!seq2_loop_active)
         {
             sb2.setLoop(true);
             seq2_loop_active = true;
-            Serial.printf("\n\r[SEQ2] Loop activated");
+            Serial.printf("\n\r[SEQ2->VCO2] Loop activated");
         }
         else
         {
             sb2.stopPlay();
             seq2_loop_active = false;
-            Serial.printf("\n\r[SEQ2] Playback stopped");
+            Serial.printf("\n\r[SEQ2->VCO2] Playback stopped");
         }
     }
 }
@@ -224,17 +235,14 @@ void updateMetronome()
 {
     unsigned long now = millis();
     
-    // BPM von Potentiometer lesen (alle 100ms)
     static unsigned long last_bpm_read = 0;
     if((now - last_bpm_read) > 100)
     {
         int adc_value = analogRead(PIN_BPM);
-        // Map ADC (0-4095) zu BPM (40-240)
         current_bpm = map(adc_value, 0, 4095, 40, 240);
         last_bpm_read = now;
     }
     
-    // Metronome Button (Toggle)
     if(readButton(PIN_B_METRONOME, btn_metronome))
     {
         metronome_enabled = !metronome_enabled;
@@ -243,55 +251,41 @@ void updateMetronome()
         
         if(!metronome_enabled)
         {
-            digitalWrite(PIN_L_METRONOME, HIGH); // Active-low: HIGH = OFF
+            digitalWrite(PIN_L_METRONOME, HIGH);
             metronome_led_on = false;
         }
     }
     
     if(!metronome_enabled) return;
     
-    // Berechne Beat-Intervall in ms
     unsigned long beat_interval = 60000UL / current_bpm;
     
-    // Neue Beat?
     if((now - last_beat_time) >= beat_interval)
     {
-        digitalWrite(PIN_L_METRONOME, LOW); // Active-low: LOW = ON
+        digitalWrite(PIN_L_METRONOME, LOW);
         metronome_led_on = true;
         last_beat_time = now;
-        last_pulse_end_time = now + 50; // 50ms Pulse
+        last_pulse_end_time = now + 50;
     }
     
-    // Pulse beenden?
     if(metronome_led_on && (now >= last_pulse_end_time))
     {
-        digitalWrite(PIN_L_METRONOME, HIGH); // Active-low: HIGH = OFF
+        digitalWrite(PIN_L_METRONOME, HIGH);
         metronome_led_on = false;
     }
 }
 
-void updateVCOGates(bool cv1_active, bool cv2_active)
-{
-    // PIN_VCO1_EN: HIGH wenn CV1 aktiv (Key mapped to CV-Gate 1)
-    digitalWrite(PIN_VCO1_EN, cv1_active ? HIGH : LOW);
-    
-    // PIN_VCO2_EN: HIGH wenn CV2 aktiv (Key mapped to CV-Gate 2)
-    digitalWrite(PIN_VCO2_EN, cv2_active ? HIGH : LOW);
-}
-
 void updateRecordingLED()
 {
-    // PIN_REC: Active-low (LOW = LED ON)
     bool any_recording = sb1.isRecording() || sb2.isRecording();
     digitalWrite(PIN_REC, any_recording ? LOW : HIGH);
 }
 
-
 void setup()
 {
     Serial.begin(BAUDRATE);
     delay(2000);
-    Serial.printf("\n\r=== COMPLETE VERSION with TODOs ===");
+    Serial.printf("\n\r=== DUAL SEQUENCER: SB1->VCO1 | SB2->VCO2 ===");
     Serial.printf("\n\rSerial OK!");
 
     keyboard.begin();
@@ -317,45 +311,43 @@ void setup()
     sb1.setLoop(false);
     sb2.setLoop(false);
     
-    Serial.printf("\n\r=== Dual-Channel Sequencer System Started ===");
-    Serial.printf("\n\rFeatures:");
-    Serial.printf("\n\r  - VCO1/VCO2 Gate Outputs");
-    Serial.printf("\n\r  - Recording LED Indicator");
-    Serial.printf("\n\r  - BPM Metronome (40-240 BPM)");
-    Serial.printf("\n\r==============================================\n\r");
+    Serial.printf("\n\r=== System Started ===");
+    Serial.printf("\n\rMapping:");
+    Serial.printf("\n\r  SB1 -> VCO1 (CV-Ch 0) | SB2 -> VCO2 (CV-Ch 1)");
+    Serial.printf("\n\rManual fallback:");
+    Serial.printf("\n\r  SB1 playing, SB2 idle  -> VCO2 manual (Queue[0])");
+    Serial.printf("\n\r  SB2 playing, SB1 idle  -> VCO1 manual (Queue[0])");
+    Serial.printf("\n\r  Both idle              -> VCO1=Queue[0], VCO2=Queue[1]");
+    Serial.printf("\n\r=====================================\n\r");
 }
 
 void loop() 
 {
-    // ===== DEBUG HEARTBEAT =====
+    // DEBUG HEARTBEAT 
     static unsigned long lastDebugPrint = 0;
     static unsigned long loopCounter = 0;
-    
     loopCounter++;
     
     if(millis() - lastDebugPrint > 5000)
     {
         Serial.printf("\n\r[HEARTBEAT] Loop: %lu | BPM: %d | Metro: %s", 
                      loopCounter, current_bpm, metronome_enabled ? "ON" : "OFF");
-        Serial.printf("\n\r[DEBUG] SB1: Rec=%d, Play=%d, Steps=%d", 
+        Serial.printf("\n\r[DEBUG] SB1->VCO1: Rec=%d, Play=%d, Steps=%d", 
                      sb1.isRecording(), sb1.isPlaying(), sb1.getStepCount());
-        Serial.printf("\n\r[DEBUG] SB2: Rec=%d, Play=%d, Steps=%d", 
+        Serial.printf("\n\r[DEBUG] SB2->VCO2: Rec=%d, Play=%d, Steps=%d", 
                      sb2.isRecording(), sb2.isPlaying(), sb2.getStepCount());
         lastDebugPrint = millis();
     }
     
-    // ===== NON-BLOCKING TIMING =====
+    // NON-BLOCKING TIMING 
     static unsigned long lastLoopTime = 0;
     unsigned long now = millis();
     const unsigned long LOOP_INTERVAL = 10;
     
-    if((now - lastLoopTime) < LOOP_INTERVAL)
-    {
-        return;
-    }
+    if((now - lastLoopTime) < LOOP_INTERVAL) return;
     lastLoopTime = now;
     
-    // ===== UPDATE FUNCTIONS =====
+    // UPDATE 
     keyboard.update();
     handleSequencerButtons();
     updateMetronome();
@@ -364,97 +356,150 @@ void loop()
     sb1.update();
     sb2.update();
     
+    // KEYBOARD INPUT
     int n = keyboard.getQueueLength();
     
-    // Aktuelle Spannungen ermitteln
-    uint16_t voltage_ch1 = 0;
-    uint16_t voltage_ch2 = 0;
-    bool cv1_active = false;
-    bool cv2_active = false;
+    // Key 0 -> wird als manueller Eingang für den jeweils freien VCO genutzt
+    uint16_t manual_voltage_0 = 0;
+    uint16_t manual_voltage_1 = 0;
+    bool manual_active_0 = false;
+    bool manual_active_1 = false;
     
     if(n > 0)
     {
-        Key k1 = keyboard.getQueue(0);
-        if(!isNotKey(k1))
+        Key k = keyboard.getQueue(0);
+        if(!isNotKey(k))
         {
-            Serial.printf("\n\r[DEBUG] K1: R%iC%i", k1.row, k1.col);
-            voltage_ch1 = keyToVoltage[k1.row * N_KEYBOARD_COL + k1.col];
-            cv1_active = true;
+            manual_voltage_0 = keyToVoltage[k.row * N_KEYBOARD_COL + k.col];
+            manual_active_0 = true;
         }
     }
     
     if(n > 1)
     {
-        Key k2 = keyboard.getQueue(1);
-        if(!isNotKey(k2))
+        Key k = keyboard.getQueue(1);
+        if(!isNotKey(k))
         {
-            Serial.printf("\n\r[DEBUG] K2: R%iC%i", k2.row, k2.col);
-            voltage_ch2 = keyToVoltage[k2.row * N_KEYBOARD_COL + k2.col];
-            cv2_active = true;
+            manual_voltage_1 = keyToVoltage[k.row * N_KEYBOARD_COL + k.col];
+            manual_active_1 = true;
+        }
+    }
+
+    // ===== RECORDING =====
+    // SB1 nimmt immer ch1=manual_voltage_0 / ch2=manual_voltage_1 auf
+    // (SB1 ist für VCO1 zuständig, nutzt den vollen Keyboard-Input)
+    if(sb1.isRecording())
+    {
+        bool changed = (manual_voltage_0 != sb1_last_voltage_ch1) ||
+                       (manual_voltage_1 != sb1_last_voltage_ch2);
+        if(changed)
+        {
+            sb1.addStep(manual_voltage_0, manual_voltage_1);
+            sb1_last_voltage_ch1 = manual_voltage_0;
+            sb1_last_voltage_ch2 = manual_voltage_1;
         }
     }
     
-    // Recording
-    bool voltageChanged = (voltage_ch1 != last_voltage_ch1) || (voltage_ch2 != last_voltage_ch2);
-    
-    if(sb1.isRecording() && voltageChanged)
+    // SB2 nimmt ebenfalls den vollen Keyboard-Input auf
+    if(sb2.isRecording())
     {
-        sb1.addStep(voltage_ch1, voltage_ch2);
-        last_voltage_ch1 = voltage_ch1;
-        last_voltage_ch2 = voltage_ch2;
+        bool changed = (manual_voltage_0 != sb2_last_voltage_ch1) ||
+                       (manual_voltage_1 != sb2_last_voltage_ch2);
+        if(changed)
+        {
+            sb2.addStep(manual_voltage_0, manual_voltage_1);
+            sb2_last_voltage_ch1 = manual_voltage_0;
+            sb2_last_voltage_ch2 = manual_voltage_1;
+        }
     }
-    
-    if(sb2.isRecording() && voltageChanged)
+
+    // ===== CV OUTPUT & VCO GATES =====
+    //
+    //  SB1 state   | SB2 state   | VCO1 (ch 0)         | VCO2 (ch 1)
+    //  ------------|-------------|---------------------|----------------------
+    //  playing     | playing     | SB1 seq voltage     | SB2 seq voltage
+    //  playing     | recording   | SB1 seq voltage     | live manual Queue[0]
+    //  playing     | idle        | SB1 seq voltage     | live manual Queue[0]
+    //  idle        | playing     | live manual Queue[0]| SB2 seq voltage
+    //  idle        | recording   | live manual Queue[0]| live manual Queue[0]
+    //  idle        | idle        | live manual Queue[0]| live manual Queue[1]
+
+    bool sb1_playing   = sb1.isPlaying();
+    bool sb1_recording = sb1.isRecording();
+    bool sb2_playing   = sb2.isPlaying();
+    bool sb2_recording = sb2.isRecording();
+
+    uint16_t out_vco1 = 0;
+    uint16_t out_vco2 = 0;
+    bool gate_vco1 = false;
+    bool gate_vco2 = false;
+
+    // VCO1
+    if(sb1_playing)
     {
-        sb2.addStep(voltage_ch1, voltage_ch2);
-        last_voltage_ch1 = voltage_ch1;
-        last_voltage_ch2 = voltage_ch2;
+        // SB1 Sequenz läuft -> Sequenz-Ausgabe
+        out_vco1  = sb1.getCurrentVoltageCh1();
+        gate_vco1 = sb1.isCurrentStepActive();
     }
-    
-    // CV-Ausgabe & VCO Gates
-    if(sb1.isPlaying())
+    else if(sb1_recording)
     {
-        uint16_t seq_v1 = sb1.getCurrentVoltageCh1();
-        uint16_t seq_v2 = sb1.getCurrentVoltageCh2();
-        cv.setVoltage(0, seq_v1);
-        cv.setVoltage(1, seq_v2);
-        
-        // KORREKT: Nutze isCurrentStepActive() statt Spannung > 0
-        // Da 0V eine gültige Note sein kann!
-        bool gate_active = sb1.isCurrentStepActive();
-        updateVCOGates(gate_active, gate_active);
-    }
-    else if(sb2.isPlaying())
-    {
-        uint16_t seq_v1 = sb2.getCurrentVoltageCh1();
-        uint16_t seq_v2 = sb2.getCurrentVoltageCh2();
-        cv.setVoltage(0, seq_v1);
-        cv.setVoltage(1, seq_v2);
-        
-        bool gate_active = sb2.isCurrentStepActive();
-        updateVCOGates(gate_active, gate_active);
+        // SB1 nimmt auf -> Live-Ausgabe damit man hört was man spielt
+        out_vco1  = manual_voltage_0;
+        gate_vco1 = manual_active_0;
     }
     else
     {
-        // Live-Modus: cv1_active/cv2_active basieren auf tatsächlich gedrückten Tasten
-        cv.setVoltage(0, voltage_ch1);
-        cv.setVoltage(1, voltage_ch2);
-        updateVCOGates(cv1_active, cv2_active);
+        // SB1 idle -> manuell
+        out_vco1  = manual_voltage_0;
+        gate_vco1 = manual_active_0;
+    }
+
+    // VCO2
+    if(sb2_playing)
+    {
+        // SB2 Sequenz läuft -> Sequenz-Ausgabe
+        out_vco2  = sb2.getCurrentVoltageCh1();
+        gate_vco2 = sb2.isCurrentStepActive();
+    }
+    else if(sb2_recording)
+    {
+        // SB2 nimmt auf -> Live-Ausgabe damit man hört was man spielt
+        out_vco2  = manual_voltage_0;
+        gate_vco2 = manual_active_0;
+        gate_vco1 = false;
+    }
+    else if(sb1_playing)
+    {
+        // SB1 läuft, SB2 idle -> VCO2 manuell mit Queue[0]
+        out_vco2  = manual_voltage_0;
+        gate_vco2 = manual_active_0;
+    }
+    else
+    {
+        // Beide idle -> VCO2 bekommt Queue[1]
+        out_vco2  = manual_voltage_1;
+        gate_vco2 = manual_active_1;
     }
     
-    // Time-Limit Check
+    cv.setVoltage(0, out_vco1);   // CH_A -> VCO1
+    cv.setVoltage(1, out_vco2);   // CH_B -> VCO2
+    
+    digitalWrite(PIN_VCO1_EN, gate_vco1 ? HIGH : LOW);
+    digitalWrite(PIN_VCO2_EN, gate_vco2 ? HIGH : LOW);
+    
+    // TIME-LIMIT CHECK
     if(sb1.isRecording() && sb1.timeLimitReached())
     {
         sb1.stopRecord();
-        Serial.printf("\n\r[SEQ1] Time limit reached! Recording stopped.");
-        Serial.printf("\n\r[SEQ1] Final: Steps: %i, Duration: %ims", 
+        Serial.printf("\n\r[SEQ1->VCO1] Time limit reached! Recording stopped.");
+        Serial.printf("\n\r[SEQ1->VCO1] Final: Steps: %i, Duration: %ims", 
                      sb1.getStepCount(), sb1.getTotalDuration());
     }
     if(sb2.isRecording() && sb2.timeLimitReached())
     {
         sb2.stopRecord();
-        Serial.printf("\n\r[SEQ2] Time limit reached! Recording stopped.");
-        Serial.printf("\n\r[SEQ2] Final: Steps: %i, Duration: %ims", 
+        Serial.printf("\n\r[SEQ2->VCO2] Time limit reached! Recording stopped.");
+        Serial.printf("\n\r[SEQ2->VCO2] Final: Steps: %i, Duration: %ims", 
                      sb2.getStepCount(), sb2.getTotalDuration());
     }
 }