; generated by PrusaSlicer 2.9.0 on 2026-01-04 at 14:30:59 UTC
; Postprocessed by [ArcWelder](https://github.com/FormerLurker/ArcWelderLib)
; Copyright(C) 2021 - Brad Hochgesang
; Version: 1.2.0, Branch: HEAD, BuildDate: 2021-11-21T20:25:43Z
; resolution=0.05mm
; path_tolerance=5.0%
; max_radius=9999.00mm
; default_xyz_precision=3
; default_e_precision=5
; extrusion_rate_variance_percent=5.0%


; 

; external perimeters extrusion width = 0.42mm
; perimeters extrusion width = 0.45mm
; infill extrusion width = 0.45mm
; solid infill extrusion width = 0.50mm
; top infill extrusion width = 0.42mm
; support material extrusion width = 0.42mm
; first layer extrusion width = 0.56mm

M201 X2500 Y2500 Z800 E2500 ; sets maximum accelerations, mm/sec^2
M203 X250 Y250 Z8 E80 ; sets maximum feedrates, mm / sec
M204 S2500 T2500 ; sets acceleration (S) and retract acceleration (R), mm/sec^2
M205 X10.00 Y10.00 Z2.00 E10.00 ; sets the jerk limits, mm/sec
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec
;TYPE:Custom
G90 ; use absolute coordinates
M83 ; extruder relative mode
M104 S215 ; set extruder temp
M140 S60 ; set bed temp
M190 S60 ; wait for bed temp
M109 S215 ; wait for extruder temp
G28                                        ; move X/Y/Z to min endstops
G1 Z0.28                                   ; lift nozzle a bit 
G92 E0 
G1 Y3 F1800                                    ; zero the extruded length 
G1 X60  E25 F500                       ; Extrude 25mm of filament in a 5cm line. 
G92 E0                                     ; zero the extruded length again 
G1 E-2 F500                                ; Retract a little 
G1 X70 F4000                              ; Quickly wipe away from the filament line
M117
G21 ; set units to millimeters
G90 ; use absolute coordinates
M82 ; use absolute distances for extrusion
G92 E0
M107
;LAYER_CHANGE
;Z:0.28
;HEIGHT:0.28
G1 E-2 F4800
G92 E0
G1 Z.28 F7200
G92 E0
G1 X114.72 Y114.72
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.56
G1 F1500
G1 X105.28 Y114.72 E2.54936
G1 X105.28 Y105.28 E3.09872
G1 X114.72 Y105.28 E3.64808
G1 X114.72 Y114.66 E4.19395
G1 X114.22 Y114.22 F7200
;TYPE:Perimeter
G1 F1500
G1 X105.78 Y114.22 E4.68512
G1 X105.78 Y105.78 E5.17629
G1 X114.22 Y105.78 E5.66746
G1 X114.22 Y114.16 E6.15513
G1 X113.72 Y113.72 F7200
G1 F1500
G1 X106.28 Y113.72 E6.5881
G1 X106.28 Y106.28 E7.02107
G1 X113.72 Y106.28 E7.45404
G1 X113.72 Y113.66 E7.88352
G1 E6.48352 F4800
;WIPE_START
G1 F5760
G1 X113.72 Y113.72 E6.43602
G1 X113.022 Y113.72 E5.88352
;WIPE_END
G92 E0
G1 X109.724 Y108.119 F7200
G1 E2 F4800
;TYPE:External perimeter
G1 F1500
G3 X109.479 Y108.171 I0.271 J1.882 E2.67988
G1 X109.665 Y108.131 E2.69095
G1 X109.665 Y108.131 F7200
G1 X109.651 Y107.623
;TYPE:Perimeter
G1 F1500
G3 X109.334 Y107.691 I0.345 J2.379 E3.54996
G1 X109.592 Y107.636 E3.56531
G1 X109.592 Y107.636 F7200
G1 X109.578 Y107.127
G1 F1500
G3 X109.190 Y107.210 I0.412 J2.877 E4.60343
G1 X109.519 Y107.14 E4.623
G1 X108.615 Y106.837 F7200
;TYPE:Gap fill
;WIDTH:0.578014
G1 F1500
G1 X108.825 Y106.797 E4.63589
;WIDTH:0.505201
G1 X109.288 Y106.729 E4.66014
;WIDTH:0.42219
G3 X110.572 Y106.711 I0.733 J6.467 E4.71434
;WIDTH:0.477487
G1 X110.869 Y106.75 E4.7289
;WIDTH:0.575309
G1 X111.393 Y106.823 E4.76063
G1 E3.36063 F4800
;WIPE_START
G1 F5760
G2 X110.642 Y106.720 I-7.706 J53.400 E2.76063
;WIPE_END
G92 E0
G1 X113.52 Y107.526 F7200
G1 E2 F4800
;TYPE:Solid infill
;WIDTH:0.576753
G1 F1500
G1 X112.699 Y106.705 E2.06983
G1 X111.968 Y106.705 E2.1138
G1 X113.52 Y108.257 E2.24581
G1 X113.52 Y108.257 F7200
G1 X113.169 Y108.619
;TYPE:Gap fill
;WIDTH:0.577938
G1 F1500
G1 X113.235 Y109.024 E2.27055
;WIDTH:0.501706
G3 X113.293 Y109.571 I-2.964 J0.591 E2.29885
;WIDTH:0.415006
G3 X113.271 Y110.703 I-4.693 J0.475 E2.34571
;WIDTH:0.49664
G1 X113.233 Y110.999 E2.36088
;WIDTH:0.573677
G1 X113.213 Y111.147 E2.36981
G1 X113.031 Y111.247 E2.38223
;WIDTH:0.495108
G1 X112.874 Y111.332 E2.39127
G1 X112.874 Y111.332 F7200
G1 X112.58 Y111.716
;TYPE:Solid infill
;WIDTH:0.622961
G1 F1500
G1 X113.295 Y112.431 E2.45753
G1 X113.295 Y113.228 E2.50975
G1 X112.386 Y112.318 E2.59403
G1 X111.965 Y112.693 E2.63097
G1 X112.792 Y113.52 E2.7076
G1 X112.792 Y113.52 F7200
G1 X111.381 Y113.167
;TYPE:Gap fill
;WIDTH:0.578201
G1 F1500
G1 X111.013 Y113.23 E2.73012
;WIDTH:0.510686
G1 X110.483 Y113.289 E2.75809
;WIDTH:0.422423
G3 X109.295 Y113.270 I-0.516 J-4.879 E2.80830
;WIDTH:0.510629
G1 X108.886 Y113.22 E2.82991
;WIDTH:0.57489
G1 X108.843 Y113.213 E2.83252
G1 X108.661 Y112.847 E2.85702
G1 X108.661 Y112.847 F7200
G1 X108.255 Y113.52
;TYPE:Solid infill
;WIDTH:0.576405
G1 F1500
G1 X106.705 Y111.97 E2.98877
G1 X106.705 Y112.7 E3.03265
G1 X107.525 Y113.52 E3.10235
G1 E1.70235 F4800
;WIPE_START
G1 F5760
G1 X106.989 Y112.984 E1.10235
;WIPE_END
G92 E0
G1 X106.835 Y111.382 F7200
G1 E2 F4800
;TYPE:Gap fill
;WIDTH:0.534726
G1 F1500
G1 X106.745 Y110.884 E2.02796
;WIDTH:0.480447
G1 X106.715 Y110.537 E2.045
;WIDTH:0.403137
G3 X106.701 Y109.553 I5.138 J-0.565 E2.08434
;WIDTH:0.496139
G1 X106.748 Y109.145 E2.10519
;WIDTH:0.576346
G3 X106.842 Y108.597 I3.177 J0.263 E2.13864
G1 E.73864 F4800
;WIPE_START
G1 F5760
G2 X106.725 Y109.345 I6.688 J1.429 E0.13864
;WIPE_END
G92 E0
G1 X107.253 Y106.48 F7200
G1 E2 F4800
;TYPE:Solid infill
;WIDTH:0.59618
G1 F1500
G1 X108.069 Y107.296 E2.07202
G2 X107.661 Y107.646 I0.673 J1.198 E2.10570
G1 X106.705 Y106.705 E2.18941
G1 X106.705 Y107.448 E2.23578
G1 X107.473 Y108.216 E2.30356
;LAYER_CHANGE
;Z:0.48
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 1 @ 0.48mm
G1 E.90356 F4800
;WIPE_START
G1 F5760
G1 X106.937 Y107.68 E.30356
;WIPE_END
G92 E0
G1 Z.48 F7200
; AFTER_LAYER_CHANGE 1 @ 0.48mm
M104 S195 ; set temperature
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1538
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1538
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1538
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.734 Y108.188 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1538
G3 X109.499 Y108.238 I0.263 J1.813 E2.35281
G1 X109.675 Y108.201 E2.35845
G1 X109.675 Y108.201 F7200
G1 X109.676 Y107.799
;TYPE:Perimeter
;WIDTH:0.45
G1 F1538
G3 X109.386 Y107.861 I0.319 J2.203 E2.82109
G1 X109.617 Y107.812 E2.82908
G1 X109.617 Y107.812 F7200
G1 X109.616 Y107.396
G1 F1538
G3 X109.268 Y107.470 I0.373 J2.608 E3.37658
G1 X109.557 Y107.409 E3.38658
G1 X109.557 Y107.409 F7200
G1 X109.987 Y106.418
;TYPE:Solid infill
;WIDTH:0.584072
G1 F1538
G1 X110.642 Y106.414 E3.41605
;WIDTH:0.574142
G1 X110.914 Y106.395 E3.42809
;WIDTH:0.537071
G1 X111.185 Y106.376 E3.43925
;WIDTH:0.499999
G1 X113.624 Y106.376 E3.53195
G1 X113.624 Y108.65 E3.61838
;WIDTH:0.53991
G1 X113.604 Y108.868 E3.62743
;WIDTH:0.579821
G1 X113.584 Y109.085 E3.63716
;WIDTH:0.619732
G2 X113.582 Y109.945 I3.568 J0.438 E3.67846
;WIDTH:0.609418
G2 X113.587 Y110.772 I3.439 J0.393 E3.71746
;WIDTH:0.572945
G1 X113.605 Y110.951 E3.72539
;WIDTH:0.536472
G1 X113.624 Y111.131 E3.73282
;WIDTH:0.499999
G1 X113.624 Y113.624 E3.82757
G1 X111.405 Y113.624 E3.91191
;WIDTH:0.541876
G1 X111.187 Y113.603 E3.921
;WIDTH:0.583753
G1 X110.969 Y113.582 E3.93085
;WIDTH:0.625629
G2 X110.108 Y113.582 I-0.431 J3.317 E3.97263
;WIDTH:0.604767
G2 X109.283 Y113.589 I-0.383 J3.506 E4.01121
;WIDTH:0.569845
G1 X109.103 Y113.606 E4.01913
;WIDTH:0.534922
G1 X108.924 Y113.624 E4.02649
;WIDTH:0.499999
G1 X106.376 Y113.624 E4.12333
G1 X106.376 Y111.46 E4.20558
;WIDTH:0.543989
G1 X106.398 Y111.242 E4.21471
;WIDTH:0.587979
G1 X106.42 Y111.024 E4.22464
;WIDTH:0.631969
G2 X106.419 Y110.162 I-3.144 J-0.427 E4.26693
;WIDTH:0.600572
G2 X106.410 Y109.337 I-3.842 J-0.371 E4.30523
;WIDTH:0.567048
G1 X106.393 Y109.157 E4.31311
;WIDTH:0.533524
G1 X106.376 Y108.978 E4.32044
;WIDTH:0.499999
G1 X106.376 Y106.376 E4.41933
G1 X108.485 Y106.376 E4.49949
;WIDTH:0.546928
G1 X108.703 Y106.4 E4.50868
;WIDTH:0.593857
G1 X108.921 Y106.423 E4.51872
;WIDTH:0.640786
G2 X109.759 Y106.426 I0.429 J-2.898 E4.56046
G1 X109.759 Y106.426 F7200
G1 X108.633 Y106.834
;WIDTH:0.499999
G1 F1538
G2 X106.834 Y108.637 I1.273 J3.069 E4.65975
G1 X106.834 Y106.834 E4.72828
G1 X108.404 Y106.834 E4.78795
G1 X108.404 Y106.834 F7200
G1 X109.68 Y106.986
;WIDTH:0.640786
G1 F1538
G1 X109.184 Y107.041 E4.81276
G1 X109.127 Y107.078 E4.81614
;WIDTH:0.59878
G1 X108.875 Y107.206 E4.8292
;WIDTH:0.54939
G1 X108.622 Y107.333 E4.84112
;WIDTH:0.499999
G2 X107.147 Y109.066 I1.377 J2.666 E4.92969
;WIDTH:0.54679
G1 X107.06 Y109.349 E4.94209
;WIDTH:0.593581
G1 X106.974 Y109.633 E4.95568
G1 X106.962 Y110.224 E4.98275
;WIDTH:0.596162
G1 X107.059 Y110.807 E5.00994
G1 X107.185 Y111.071 E5.0234
;WIDTH:0.548081
G1 X107.311 Y111.335 E5.03569
;WIDTH:0.499999
G2 X109.020 Y112.837 I2.691 J-1.339 E5.12424
;WIDTH:0.548423
G1 X109.302 Y112.929 E5.13671
;WIDTH:0.596847
G1 X109.584 Y113.022 E5.15039
G1 X110.174 Y113.04 E5.17758
;WIDTH:0.595535
G1 X110.759 Y112.953 E5.20476
G1 X111.025 Y112.832 E5.21819
;WIDTH:0.547767
G1 X111.291 Y112.71 E5.23047
;WIDTH:0.499999
G2 X112.821 Y111.026 I-1.286 J-2.706 E5.31903
;WIDTH:0.533516
G1 X112.886 Y110.839 E5.32711
;WIDTH:0.567032
G1 X112.951 Y110.652 E5.33574
;WIDTH:0.600548
G1 X113.016 Y110.465 E5.34492
G1 X113.042 Y109.875 E5.3723
;WIDTH:0.594788
G1 X112.965 Y109.289 E5.39942
G1 X112.848 Y109.021 E5.41284
;WIDTH:0.547394
G1 X112.731 Y108.753 E5.42511
;WIDTH:0.499999
G2 X111.072 Y107.196 I-2.734 J1.250 E5.51365
;WIDTH:0.534636
G1 X110.884 Y107.127 E5.52184
;WIDTH:0.569272
G1 X110.696 Y107.058 E5.5306
;WIDTH:0.603908
G1 X110.508 Y106.989 E5.53994
G1 X109.907 Y106.96 E5.56801
G1 X111.377 Y106.834 F7200
;WIDTH:0.499999
G1 F1538
G1 X113.167 Y106.834 E5.63604
G1 X113.167 Y108.613 E5.70365
G2 X111.579 Y106.941 I-3.035 J1.292 E5.79305
G1 E4.39305 F4800
;WIPE_START
G1 F5760
G3 X112.211 Y107.354 I-0.881 J2.038 E3.79305
;WIPE_END
G92 E0
G1 X113.167 Y111.37 F7200
G1 E2 F4800
G1 F1538
G1 X113.167 Y113.167 E2.0683
G1 X111.405 Y113.163 E2.13527
G2 X113.062 Y111.574 I-1.384 J-3.102 E2.22422
G1 E.82422 F4800
;WIPE_START
G1 F5760
G3 X112.652 Y112.208 I-2.073 J-0.891 E0.22422
;WIPE_END
G92 E0
G1 X106.834 Y111.602 F7200
G1 E2 F4800
G1 F1538
G1 X106.834 Y113.167 E2.05948
G1 X108.634 Y113.167 E2.12789
G3 X106.834 Y111.374 I1.292 J-3.097 E2.22683
M106 S255
;LAYER_CHANGE
;Z:0.68
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 2 @ 0.68mm
G1 E.82683 F4800
;WIPE_START
G1 F5760
G2 X107.213 Y112.028 I2.276 J-0.882 E0.22683
;WIPE_END
G92 E0
G1 Z.68 F7200
; AFTER_LAYER_CHANGE 2 @ 0.68mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1549
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1549
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1549
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.934 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1549
G3 X109.504 Y108.236 I0.061 J1.831 E2.34669
G1 X109.875 Y108.179 E2.35846
G1 X109.875 Y108.179 F7200
G1 X109.918 Y107.775
;TYPE:Perimeter
;WIDTH:0.45
G1 F1549
G3 X109.402 Y107.855 I0.081 J2.225 E2.81346
G1 X109.859 Y107.785 E2.82911
G1 X109.859 Y107.785 F7200
G1 X109.901 Y107.366
G1 F1549
G3 X109.296 Y107.460 I0.099 J2.634 E3.36794
G1 X109.842 Y107.375 E3.38664
G1 E1.98664 F4800
;WIPE_START
G1 F5760
G1 X109.901 Y107.366 E1.93939
G3 X110.593 Y107.442 I0.162 J1.713 E1.38664
;WIPE_END
G92 E0
G1 X106.419 Y110.162 F7200
G1 E2 F4800
;TYPE:Solid infill
;WIDTH:0.600573
G1 F1549
G2 X106.410 Y109.337 I-3.842 J-0.371 E2.03830
;WIDTH:0.567049
G1 X106.393 Y109.157 E2.04618
;WIDTH:0.533524
G1 X106.376 Y108.978 E2.05351
;WIDTH:0.499999
G1 X106.376 Y106.376 E2.1524
G1 X108.485 Y106.376 E2.23256
;WIDTH:0.544968
G1 X108.713 Y106.399 E2.24213
;WIDTH:0.589936
G1 X108.941 Y106.421 E2.25255
;WIDTH:0.634904
G2 X109.551 Y106.431 I0.342 J-2.248 E2.28264
;WIDTH:0.60893
G1 X109.933 Y106.418 E2.30063
;WIDTH:0.61361
G2 X110.822 Y106.414 I0.429 J-3.533 E2.34287
;WIDTH:0.57574
G1 X111.004 Y106.395 E2.35098
;WIDTH:0.53787
G1 X111.185 Y106.376 E2.35847
;WIDTH:0.499999
G1 X113.624 Y106.376 E2.45117
G1 X113.624 Y108.65 E2.5376
;WIDTH:0.53991
G1 X113.604 Y108.868 E2.54665
;WIDTH:0.579821
G1 X113.584 Y109.085 E2.55638
;WIDTH:0.619731
G2 X113.582 Y109.945 I3.568 J0.438 E2.59768
;WIDTH:0.609417
G2 X113.587 Y110.772 I3.439 J0.393 E2.63668
;WIDTH:0.572945
G1 X113.605 Y110.951 E2.64461
;WIDTH:0.536472
G1 X113.624 Y111.131 E2.65204
;WIDTH:0.499999
G1 X113.624 Y113.624 E2.74679
G1 X111.405 Y113.624 E2.83113
;WIDTH:0.541876
G1 X111.187 Y113.603 E2.84022
;WIDTH:0.583753
G1 X110.969 Y113.582 E2.85007
;WIDTH:0.625629
G2 X110.108 Y113.582 I-0.431 J3.317 E2.89185
;WIDTH:0.604771
G2 X109.283 Y113.589 I-0.383 J3.506 E2.93043
;WIDTH:0.569847
G1 X109.103 Y113.606 E2.93835
;WIDTH:0.534923
G1 X108.924 Y113.624 E2.94571
;WIDTH:0.499999
G1 X106.376 Y113.624 E3.04255
G1 X106.376 Y111.46 E3.1248
;WIDTH:0.543989
G1 X106.398 Y111.242 E3.13393
;WIDTH:0.587979
G1 X106.42 Y111.024 E3.14386
;WIDTH:0.631969
G2 X106.427 Y110.390 I-2.302 J-0.342 E3.17498
G1 X106.427 Y110.39 F7200
G1 X106.834 Y111.374
;WIDTH:0.499999
G1 F1549
G2 X108.634 Y113.167 I3.091 J-1.303 E3.27392
G1 X106.834 Y113.167 E3.34233
G1 X106.834 Y111.602 E3.40181
G1 X106.834 Y111.602 F7200
G1 X107 Y110.449
;WIDTH:0.596162
G1 F1549
G2 X107.185 Y111.071 I1.166 J-0.008 E3.43196
;WIDTH:0.548081
G1 X107.311 Y111.335 E3.44425
;WIDTH:0.499999
G2 X109.020 Y112.837 I2.691 J-1.339 E3.53280
;WIDTH:0.548425
G1 X109.302 Y112.929 E3.54527
;WIDTH:0.596851
G1 X109.584 Y113.022 E3.55895
G1 X110.174 Y113.04 E3.58614
;WIDTH:0.595535
G1 X110.759 Y112.953 E3.61332
G1 X111.025 Y112.832 E3.62675
;WIDTH:0.547767
G1 X111.291 Y112.71 E3.63903
;WIDTH:0.499999
G2 X112.821 Y111.026 I-1.286 J-2.706 E3.72759
;WIDTH:0.533515
G1 X112.886 Y110.839 E3.73567
;WIDTH:0.567031
G1 X112.951 Y110.652 E3.7443
;WIDTH:0.600547
G1 X113.016 Y110.465 E3.75348
G1 X113.042 Y109.875 E3.78086
;WIDTH:0.59479
G1 X112.965 Y109.289 E3.80798
G1 X112.848 Y109.021 E3.8214
;WIDTH:0.547395
G1 X112.731 Y108.753 E3.83367
;WIDTH:0.499999
G2 X111.072 Y107.196 I-2.734 J1.250 E3.92221
;WIDTH:0.534514
G1 X110.883 Y107.127 E3.93043
;WIDTH:0.569029
G1 X110.694 Y107.057 E3.93925
;WIDTH:0.603543
G1 X110.505 Y106.988 E3.94863
G1 X109.854 Y106.959 E3.97901
;WIDTH:0.634904
G1 X109.214 Y107.032 E4.01072
G1 X109.159 Y107.068 E4.01396
;WIDTH:0.594972
G1 X108.89 Y107.201 E4.02773
;WIDTH:0.547486
G1 X108.622 Y107.333 E4.04026
;WIDTH:0.499999
G2 X107.147 Y109.066 I1.377 J2.666 E4.12883
;WIDTH:0.54679
G1 X107.06 Y109.349 E4.14123
;WIDTH:0.593581
G1 X106.974 Y109.633 E4.15482
G1 X106.962 Y110.224 E4.18189
G1 X106.962 Y110.224 F7200
G1 X106.834 Y108.637
;WIDTH:0.499999
G1 F1549
G1 X106.834 Y106.834 E4.25042
G1 X108.633 Y106.834 E4.31879
G2 X106.933 Y108.432 I1.232 J3.014 E4.40942
G1 E3.00942 F4800
;WIPE_START
G1 F5760
G3 X107.338 Y107.794 I2.091 J0.880 E2.40942
;WIPE_END
G92 E0
G1 X111.377 Y106.834 F7200
G1 E2 F4800
G1 F1549
G1 X113.167 Y106.834 E2.06803
G1 X113.167 Y108.613 E2.13564
G2 X111.579 Y106.941 I-3.044 J1.301 E2.22505
G1 E.82505 F4800
;WIPE_START
G1 F5760
G3 X112.207 Y107.359 I-0.786 J1.862 E0.22505
;WIPE_END
G92 E0
G1 X111.633 Y113.164 F7200
G1 E2 F4800
G1 F1549
G1 X113.167 Y113.167 E2.0583
G1 X113.167 Y111.37 E2.1266
G3 X111.405 Y113.163 I-3.158 J-1.341 E2.22427
;LAYER_CHANGE
;Z:0.88
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 3 @ 0.88mm
G1 E.82427 F4800
;WIPE_START
G1 F5760
G1 X112.055 Y112.774 E.22427
;WIPE_END
G92 E0
G1 Z.88 F7200
; AFTER_LAYER_CHANGE 3 @ 0.88mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.923 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.074 J1.830 E2.34703
G1 X109.864 Y108.179 E2.35846
G1 X109.864 Y108.179 F7200
G1 X109.906 Y107.776
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.401 Y107.855 I0.089 J2.224 E2.81383
G1 X109.846 Y107.785 E2.82908
G1 X109.846 Y107.785 F7200
G1 X109.887 Y107.367
G1 F1500
G3 X109.294 Y107.460 I0.109 J2.633 E3.36831
G1 X109.828 Y107.376 E3.38661
G1 E1.98661 F4800
;WIPE_START
G1 F5760
G1 X109.887 Y107.367 E1.93936
G1 X110.46 Y107.405 E1.48474
G1 X110.579 Y107.439 E1.38661
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:1.08
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 4 @ 1.08mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z1.08 F7200
; AFTER_LAYER_CHANGE 4 @ 1.08mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.912 Y108.171 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.082 J1.830 E2.34740
G1 X109.853 Y108.18 E2.35848
G1 X109.853 Y108.18 F7200
G1 X109.893 Y107.777
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.400 Y107.856 I0.103 J2.223 E2.81424
G1 X109.834 Y107.786 E2.82912
G1 X109.834 Y107.786 F7200
G1 X109.873 Y107.367
G1 F1500
G3 X109.293 Y107.461 I0.129 J2.632 E3.36879
G1 X109.814 Y107.377 E3.38665
G1 E1.98665 F4800
;WIPE_START
G1 F5760
G1 X109.873 Y107.367 E1.93928
G1 X110.458 Y107.404 E1.47523
G1 X110.566 Y107.434 E1.38665
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:1.28
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 5 @ 1.28mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z1.28 F7200
; AFTER_LAYER_CHANGE 5 @ 1.28mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.901 Y108.171 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.096 J1.829 E2.34772
G1 X109.842 Y108.181 E2.35846
G1 X109.842 Y108.181 F7200
G1 X109.881 Y107.777
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.399 Y107.856 I0.117 J2.223 E2.81459
G1 X109.822 Y107.787 E2.8291
G1 X109.822 Y107.787 F7200
G1 X109.86 Y107.368
G1 F1500
G3 X109.291 Y107.461 I0.138 J2.632 E3.36914
G1 X109.8 Y107.378 E3.3866
G1 E1.9866 F4800
;WIPE_START
G1 F5760
G1 X109.86 Y107.368 E1.93844
G1 X110.456 Y107.404 E1.46575
G1 X110.552 Y107.431 E1.3866
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:1.48
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 6 @ 1.48mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z1.48 F7200
; AFTER_LAYER_CHANGE 6 @ 1.48mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.89 Y108.172 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.503 Y108.237 I0.108 J1.829 E2.34803
G1 X109.831 Y108.182 E2.35846
G1 X109.831 Y108.182 F7200
G1 X109.868 Y107.778
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.398 Y107.857 I0.132 J2.222 E2.81499
G1 X109.809 Y107.788 E2.8291
G1 X109.809 Y107.788 F7200
G1 X109.846 Y107.369
G1 F1500
G3 X109.290 Y107.462 I0.154 J2.631 E3.36957
G1 X109.787 Y107.379 E3.38663
G1 E1.98663 F4800
;WIPE_START
G1 F5760
G1 X109.846 Y107.369 E1.93926
G1 X110.455 Y107.403 E1.45638
G1 X110.54 Y107.427 E1.38663
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:1.68
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 7 @ 1.68mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z1.68 F7200
; AFTER_LAYER_CHANGE 7 @ 1.68mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.872 Y108.173 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.503 Y108.237 I0.127 J1.827 E2.34860
G1 X109.813 Y108.184 E2.35846
G1 X109.813 Y108.184 F7200
G1 X109.836 Y107.782
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.397 Y107.857 I0.153 J2.221 E2.81605
G1 X109.777 Y107.792 E2.8291
G1 X109.777 Y107.792 F7200
G1 X109.799 Y107.375
G1 F1500
G3 X109.288 Y107.463 I0.190 J2.628 E3.37110
G1 X109.74 Y107.385 E3.38663
G1 E1.98663 F4800
;WIPE_START
G1 F5760
G3 X110.494 Y107.414 I0.283 J2.452 E1.38663
;WIPE_END
G92 E0
G1 X112.235 Y108.052 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G3 X112.100 Y112.100 I-2.193 J1.953 E2.15118
G1 X113.649 Y113.649 E2.22533
G1 X113.649 Y112.108 E2.27749
G1 X112.108 Y113.649 E2.35126
G1 X107.892 Y113.649 E2.49397
G1 X106.351 Y112.108 E2.56774
G1 X106.351 Y113.649 E2.6199
G1 X107.902 Y112.098 E2.69415
G1 X108.483 Y112.564 E2.71936
G2 X111.948 Y112.235 I1.506 J-2.546 E2.84520
G1 X111.948 Y112.235 F7200
G1 X113.649 Y111.905
G1 F1500
G1 X113.649 Y107.892 E2.98104
G1 X112.108 Y106.351 E3.05481
G1 X113.649 Y106.351 E3.10697
G1 X112.102 Y107.898 E3.18102
G2 X107.903 Y107.903 I-2.097 J2.077 E3.33910
G1 X106.351 Y106.351 E3.41339
G1 X107.892 Y106.351 E3.46555
G1 X106.351 Y107.892 E3.53932
G1 X106.351 Y111.905 E3.67516
;LAYER_CHANGE
;Z:1.88
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 8 @ 1.88mm
G1 E2.27516 F4800
;WIPE_START
G1 F5760
G1 X106.351 Y111.147 E1.67516
;WIPE_END
G92 E0
G1 Z1.88 F7200
; AFTER_LAYER_CHANGE 8 @ 1.88mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.861 Y108.174 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.502 Y108.237 I0.136 J1.827 E2.34892
G1 X109.802 Y108.184 E2.35847
G1 X109.802 Y108.184 F7200
G1 X109.824 Y107.782
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.396 Y107.857 I0.168 J2.220 E2.81644
G1 X109.765 Y107.793 E2.82912
G1 X109.765 Y107.793 F7200
G1 X109.785 Y107.376
G1 F1500
G3 X109.286 Y107.463 I0.200 J2.623 E3.37153
G1 X109.726 Y107.386 E3.38665
G1 E1.98665 F4800
;WIPE_START
G1 F5760
G3 X110.481 Y107.411 I0.295 J2.504 E1.38665
;WIPE_END
G92 E0
G1 X112.235 Y108.052 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G3 X112.100 Y112.100 I-2.193 J1.953 E2.15118
G1 X113.649 Y113.649 E2.22533
G1 X113.649 Y112.108 E2.27749
G1 X112.108 Y113.649 E2.35126
G1 X107.892 Y113.649 E2.49397
G1 X106.351 Y112.108 E2.56774
G1 X106.351 Y113.649 E2.6199
G1 X107.902 Y112.098 E2.69415
G1 X108.483 Y112.564 E2.71936
G2 X111.948 Y112.235 I1.506 J-2.546 E2.84520
G1 X111.948 Y112.235 F7200
G1 X113.649 Y111.905
G1 F1500
G1 X113.649 Y107.892 E2.98104
G1 X112.108 Y106.351 E3.05481
G1 X113.649 Y106.351 E3.10697
G1 X112.102 Y107.898 E3.18102
G2 X107.903 Y107.903 I-2.097 J2.076 E3.33911
G1 X106.351 Y106.351 E3.4134
G1 X107.892 Y106.351 E3.46556
G1 X106.351 Y107.892 E3.53933
G1 X106.351 Y111.905 E3.67517
;LAYER_CHANGE
;Z:2.08
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 9 @ 2.08mm
G1 E2.27517 F4800
;WIPE_START
G1 F5760
G1 X106.351 Y111.147 E1.67517
;WIPE_END
G92 E0
G1 Z2.08 F7200
; AFTER_LAYER_CHANGE 9 @ 2.08mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.852 Y108.174 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.502 Y108.237 I0.148 J1.826 E2.34919
G1 X109.793 Y108.185 E2.35846
G1 X109.793 Y108.185 F7200
G1 X109.82 Y107.781
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.395 Y107.858 I0.182 J2.218 E2.81648
G1 X109.761 Y107.792 E2.82907
G1 X109.787 Y107.374 F7200
G1 F1500
G3 X109.284 Y107.464 I0.210 J2.626 E3.37130
G1 X109.728 Y107.384 E3.38657
G1 E1.98657 F4800
;WIPE_START
G1 F5760
G3 X110.481 Y107.421 I0.291 J1.755 E1.38657
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.096 Y112.096 E3.03726
G2 X112.096 Y107.904 I-2.045 J-2.096 E3.19538
G1 X113.649 Y106.351 E3.26972
G1 X112.108 Y106.351 E3.32188
G1 X113.649 Y107.892 E3.39565
G1 X113.649 Y111.905 E3.53149
;LAYER_CHANGE
;Z:2.28
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 10 @ 2.28mm
G1 E2.13149 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53149
;WIPE_END
G92 E0
G1 Z2.28 F7200
; AFTER_LAYER_CHANGE 10 @ 2.28mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.964 Y108.169 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.734 Y108.188 I0.036 J1.831 E2.35313
G1 X109.904 Y108.174 E2.35848
G1 X109.963 Y107.776 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.676 Y107.799 I0.034 J2.225 E2.82142
G1 X109.903 Y107.781 E2.82913
G1 X109.903 Y107.781 F7200
G1 X109.962 Y107.367
G1 F1500
G3 X109.617 Y107.396 I0.048 J2.634 E3.37697
G1 X109.902 Y107.372 E3.38665
G1 E1.98665 F4800
;WIPE_START
G1 F5760
G3 X110.651 Y107.459 I0.177 J1.740 E1.38665
;WIPE_END
G92 E0
G1 X112.235 Y108.052 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G3 X112.100 Y112.100 I-2.193 J1.953 E2.15118
G1 X113.649 Y113.649 E2.22533
G1 X113.649 Y112.108 E2.27749
G1 X112.108 Y113.649 E2.35126
G1 X107.892 Y113.649 E2.49397
G1 X106.351 Y112.108 E2.56774
G1 X106.351 Y113.649 E2.6199
G1 X107.902 Y112.098 E2.69415
G1 X108.483 Y112.564 E2.71936
G2 X111.948 Y112.235 I1.506 J-2.546 E2.84520
G1 X111.948 Y112.235 F7200
G1 X113.649 Y111.905
G1 F1500
G1 X113.649 Y107.892 E2.98104
G1 X112.108 Y106.351 E3.05481
G1 X113.649 Y106.351 E3.10697
G1 X112.102 Y107.898 E3.18102
G2 X109.961 Y107.024 I-2.084 J2.046 E3.26137
G1 X109.17 Y107.141 E3.28844
G2 X107.903 Y107.903 I0.642 J2.502 E3.33905
G1 X106.351 Y106.351 E3.41334
G1 X107.892 Y106.351 E3.4655
G1 X106.351 Y107.892 E3.53927
G1 X106.351 Y111.905 E3.67511
;LAYER_CHANGE
;Z:2.48
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 11 @ 2.48mm
G1 E2.27511 F4800
;WIPE_START
G1 F5760
G1 X106.351 Y111.147 E1.67511
;WIPE_END
G92 E0
G1 Z2.48 F7200
; AFTER_LAYER_CHANGE 11 @ 2.48mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.953 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.734 Y108.188 I0.040 J1.831 E2.35345
G1 X109.893 Y108.175 E2.35845
G1 X109.893 Y108.175 F7200
G1 X109.95 Y107.776
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.676 Y107.799 I0.049 J2.225 E2.82182
G1 X109.891 Y107.781 E2.82912
G1 X109.891 Y107.781 F7200
G1 X109.948 Y107.368
G1 F1500
G3 X109.616 Y107.396 I0.055 J2.633 E3.37738
G1 X109.888 Y107.373 E3.38662
G1 E1.98662 F4800
;WIPE_START
G1 F5760
G3 X110.637 Y107.455 I0.189 J1.738 E1.38662
;WIPE_END
G92 E0
G1 X112.235 Y108.052 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G3 X112.100 Y112.100 I-2.193 J1.953 E2.15118
G1 X113.649 Y113.649 E2.22533
G1 X113.649 Y112.108 E2.27749
G1 X112.108 Y113.649 E2.35126
G1 X107.892 Y113.649 E2.49397
G1 X106.351 Y112.108 E2.56774
G1 X106.351 Y113.649 E2.6199
G1 X107.902 Y112.098 E2.69415
G1 X108.483 Y112.564 E2.71936
G2 X111.948 Y112.235 I1.506 J-2.546 E2.84520
G1 X111.948 Y112.235 F7200
G1 X113.649 Y111.905
G1 F1500
G1 X113.649 Y107.892 E2.98104
G1 X112.108 Y106.351 E3.05481
G1 X113.649 Y106.351 E3.10697
G1 X112.102 Y107.898 E3.18102
G2 X109.946 Y107.025 I-2.082 J2.043 E3.26188
G1 X109.17 Y107.141 E3.28844
G2 X107.903 Y107.903 I0.642 J2.502 E3.33905
G1 X106.351 Y106.351 E3.41334
G1 X107.892 Y106.351 E3.4655
G1 X106.351 Y107.892 E3.53927
G1 X106.351 Y111.905 E3.67511
;LAYER_CHANGE
;Z:2.68
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 12 @ 2.68mm
G1 E2.27511 F4800
;WIPE_START
G1 F5760
G1 X106.351 Y111.147 E1.67511
;WIPE_END
G92 E0
G1 Z2.68 F7200
; AFTER_LAYER_CHANGE 12 @ 2.68mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.934 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.061 J1.831 E2.34669
G1 X109.875 Y108.179 E2.35846
G1 X109.875 Y108.179 F7200
G1 X109.918 Y107.775
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.402 Y107.855 I0.081 J2.225 E2.81346
G1 X109.859 Y107.785 E2.82911
G1 X109.859 Y107.785 F7200
G1 X109.901 Y107.366
G1 F1500
G3 X109.296 Y107.460 I0.099 J2.634 E3.36794
G1 X109.842 Y107.375 E3.38664
G1 E1.98664 F4800
;WIPE_START
G1 F5760
G1 X109.901 Y107.366 E1.93939
G3 X110.593 Y107.442 I0.162 J1.713 E1.38664
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:2.88
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 13 @ 2.88mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z2.88 F7200
; AFTER_LAYER_CHANGE 13 @ 2.88mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.923 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.074 J1.830 E2.34703
G1 X109.864 Y108.179 E2.35846
G1 X109.864 Y108.179 F7200
G1 X109.906 Y107.776
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.401 Y107.855 I0.089 J2.224 E2.81383
G1 X109.846 Y107.785 E2.82908
G1 X109.846 Y107.785 F7200
G1 X109.887 Y107.367
G1 F1500
G3 X109.294 Y107.460 I0.109 J2.633 E3.36831
G1 X109.828 Y107.376 E3.38661
G1 E1.98661 F4800
;WIPE_START
G1 F5760
G1 X109.887 Y107.367 E1.93936
G1 X110.46 Y107.405 E1.48474
G1 X110.579 Y107.439 E1.38661
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:3.08
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 14 @ 3.08mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z3.08 F7200
; AFTER_LAYER_CHANGE 14 @ 3.08mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.912 Y108.171 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.082 J1.830 E2.34740
G1 X109.853 Y108.18 E2.35848
G1 X109.853 Y108.18 F7200
G1 X109.893 Y107.777
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.400 Y107.856 I0.103 J2.223 E2.81424
G1 X109.834 Y107.786 E2.82912
G1 X109.834 Y107.786 F7200
G1 X109.873 Y107.367
G1 F1500
G3 X109.293 Y107.461 I0.129 J2.632 E3.36879
G1 X109.814 Y107.377 E3.38665
G1 E1.98665 F4800
;WIPE_START
G1 F5760
G1 X109.873 Y107.367 E1.93928
G1 X110.458 Y107.404 E1.47523
G1 X110.566 Y107.434 E1.38665
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:3.28
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 15 @ 3.28mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z3.28 F7200
; AFTER_LAYER_CHANGE 15 @ 3.28mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.901 Y108.171 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.096 J1.829 E2.34772
G1 X109.842 Y108.181 E2.35846
G1 X109.842 Y108.181 F7200
G1 X109.881 Y107.777
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.399 Y107.856 I0.117 J2.223 E2.81459
G1 X109.822 Y107.787 E2.8291
G1 X109.822 Y107.787 F7200
G1 X109.86 Y107.368
G1 F1500
G3 X109.291 Y107.461 I0.138 J2.632 E3.36914
G1 X109.8 Y107.378 E3.3866
G1 E1.9866 F4800
;WIPE_START
G1 F5760
G1 X109.86 Y107.368 E1.93844
G1 X110.456 Y107.404 E1.46575
G1 X110.552 Y107.431 E1.3866
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:3.48
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 16 @ 3.48mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z3.48 F7200
; AFTER_LAYER_CHANGE 16 @ 3.48mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.89 Y108.172 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.503 Y108.237 I0.108 J1.829 E2.34803
G1 X109.831 Y108.182 E2.35846
G1 X109.831 Y108.182 F7200
G1 X109.868 Y107.778
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.398 Y107.857 I0.132 J2.222 E2.81499
G1 X109.809 Y107.788 E2.8291
G1 X109.809 Y107.788 F7200
G1 X109.846 Y107.369
G1 F1500
G3 X109.290 Y107.462 I0.154 J2.631 E3.36957
G1 X109.787 Y107.379 E3.38663
G1 E1.98663 F4800
;WIPE_START
G1 F5760
G1 X109.846 Y107.369 E1.93926
G1 X110.455 Y107.403 E1.45638
G1 X110.54 Y107.427 E1.38663
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:3.68
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 17 @ 3.68mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z3.68 F7200
; AFTER_LAYER_CHANGE 17 @ 3.68mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.872 Y108.173 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.503 Y108.237 I0.127 J1.827 E2.34860
G1 X109.813 Y108.184 E2.35846
G1 X109.813 Y108.184 F7200
G1 X109.836 Y107.782
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.397 Y107.857 I0.153 J2.221 E2.81605
G1 X109.777 Y107.792 E2.8291
G1 X109.777 Y107.792 F7200
G1 X109.799 Y107.375
G1 F1500
G3 X109.288 Y107.463 I0.190 J2.628 E3.37110
G1 X109.74 Y107.385 E3.38663
G1 E1.98663 F4800
;WIPE_START
G1 F5760
G3 X110.494 Y107.414 I0.283 J2.452 E1.38663
;WIPE_END
G92 E0
G1 X112.235 Y108.052 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G3 X112.100 Y112.100 I-2.193 J1.953 E2.15118
G1 X113.649 Y113.649 E2.22533
G1 X113.649 Y112.108 E2.27749
G1 X112.108 Y113.649 E2.35126
G1 X107.892 Y113.649 E2.49397
G1 X106.351 Y112.108 E2.56774
G1 X106.351 Y113.649 E2.6199
G1 X107.902 Y112.098 E2.69415
G1 X108.483 Y112.564 E2.71936
G2 X111.948 Y112.235 I1.506 J-2.546 E2.84520
G1 X111.948 Y112.235 F7200
G1 X113.649 Y111.905
G1 F1500
G1 X113.649 Y107.892 E2.98104
G1 X112.108 Y106.351 E3.05481
G1 X113.649 Y106.351 E3.10697
G1 X112.102 Y107.898 E3.18102
G2 X107.903 Y107.903 I-2.097 J2.077 E3.33910
G1 X106.351 Y106.351 E3.41339
G1 X107.892 Y106.351 E3.46555
G1 X106.351 Y107.892 E3.53932
G1 X106.351 Y111.905 E3.67516
;LAYER_CHANGE
;Z:3.88
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 18 @ 3.88mm
G1 E2.27516 F4800
;WIPE_START
G1 F5760
G1 X106.351 Y111.147 E1.67516
;WIPE_END
G92 E0
G1 Z3.88 F7200
; AFTER_LAYER_CHANGE 18 @ 3.88mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.861 Y108.174 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.502 Y108.237 I0.136 J1.827 E2.34892
G1 X109.802 Y108.184 E2.35847
G1 X109.802 Y108.184 F7200
G1 X109.824 Y107.782
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.396 Y107.857 I0.168 J2.220 E2.81644
G1 X109.765 Y107.793 E2.82912
G1 X109.765 Y107.793 F7200
G1 X109.785 Y107.376
G1 F1500
G3 X109.286 Y107.463 I0.200 J2.623 E3.37153
G1 X109.726 Y107.386 E3.38665
G1 E1.98665 F4800
;WIPE_START
G1 F5760
G3 X110.481 Y107.411 I0.295 J2.504 E1.38665
;WIPE_END
G92 E0
G1 X112.235 Y108.052 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G3 X112.100 Y112.100 I-2.193 J1.953 E2.15118
G1 X113.649 Y113.649 E2.22533
G1 X113.649 Y112.108 E2.27749
G1 X112.108 Y113.649 E2.35126
G1 X107.892 Y113.649 E2.49397
G1 X106.351 Y112.108 E2.56774
G1 X106.351 Y113.649 E2.6199
G1 X107.902 Y112.098 E2.69415
G1 X108.483 Y112.564 E2.71936
G2 X111.948 Y112.235 I1.506 J-2.546 E2.84520
G1 X111.948 Y112.235 F7200
G1 X113.649 Y111.905
G1 F1500
G1 X113.649 Y107.892 E2.98104
G1 X112.108 Y106.351 E3.05481
G1 X113.649 Y106.351 E3.10697
G1 X112.102 Y107.898 E3.18102
G2 X107.903 Y107.903 I-2.097 J2.076 E3.33911
G1 X106.351 Y106.351 E3.4134
G1 X107.892 Y106.351 E3.46556
G1 X106.351 Y107.892 E3.53933
G1 X106.351 Y111.905 E3.67517
;LAYER_CHANGE
;Z:4.08
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 19 @ 4.08mm
G1 E2.27517 F4800
;WIPE_START
G1 F5760
G1 X106.351 Y111.147 E1.67517
;WIPE_END
G92 E0
G1 Z4.08 F7200
; AFTER_LAYER_CHANGE 19 @ 4.08mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.852 Y108.174 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.502 Y108.237 I0.148 J1.826 E2.34919
G1 X109.793 Y108.185 E2.35846
G1 X109.793 Y108.185 F7200
G1 X109.82 Y107.781
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.395 Y107.858 I0.182 J2.218 E2.81648
G1 X109.761 Y107.792 E2.82907
G1 X109.787 Y107.374 F7200
G1 F1500
G3 X109.284 Y107.464 I0.210 J2.626 E3.37130
G1 X109.728 Y107.384 E3.38657
G1 E1.98657 F4800
;WIPE_START
G1 F5760
G3 X110.481 Y107.421 I0.291 J1.755 E1.38657
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.096 Y112.096 E3.03726
G2 X112.096 Y107.904 I-2.045 J-2.096 E3.19538
G1 X113.649 Y106.351 E3.26972
G1 X112.108 Y106.351 E3.32188
G1 X113.649 Y107.892 E3.39565
G1 X113.649 Y111.905 E3.53149
;LAYER_CHANGE
;Z:4.28
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 20 @ 4.28mm
G1 E2.13149 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53149
;WIPE_END
G92 E0
G1 Z4.28 F7200
; AFTER_LAYER_CHANGE 20 @ 4.28mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.964 Y108.169 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.734 Y108.188 I0.036 J1.831 E2.35313
G1 X109.904 Y108.174 E2.35848
G1 X109.963 Y107.776 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.676 Y107.799 I0.034 J2.225 E2.82142
G1 X109.903 Y107.781 E2.82913
G1 X109.903 Y107.781 F7200
G1 X109.962 Y107.367
G1 F1500
G3 X109.617 Y107.396 I0.048 J2.634 E3.37697
G1 X109.902 Y107.372 E3.38665
G1 E1.98665 F4800
;WIPE_START
G1 F5760
G3 X110.651 Y107.459 I0.177 J1.740 E1.38665
;WIPE_END
G92 E0
G1 X112.235 Y108.052 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G3 X112.100 Y112.100 I-2.193 J1.953 E2.15118
G1 X113.649 Y113.649 E2.22533
G1 X113.649 Y112.108 E2.27749
G1 X112.108 Y113.649 E2.35126
G1 X107.892 Y113.649 E2.49397
G1 X106.351 Y112.108 E2.56774
G1 X106.351 Y113.649 E2.6199
G1 X107.902 Y112.098 E2.69415
G1 X108.483 Y112.564 E2.71936
G2 X111.948 Y112.235 I1.506 J-2.546 E2.84520
G1 X111.948 Y112.235 F7200
G1 X113.649 Y111.905
G1 F1500
G1 X113.649 Y107.892 E2.98104
G1 X112.108 Y106.351 E3.05481
G1 X113.649 Y106.351 E3.10697
G1 X112.102 Y107.898 E3.18102
G2 X109.961 Y107.024 I-2.084 J2.046 E3.26137
G1 X109.17 Y107.141 E3.28844
G2 X107.903 Y107.903 I0.642 J2.502 E3.33905
G1 X106.351 Y106.351 E3.41334
G1 X107.892 Y106.351 E3.4655
G1 X106.351 Y107.892 E3.53927
G1 X106.351 Y111.905 E3.67511
;LAYER_CHANGE
;Z:4.48
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 21 @ 4.48mm
G1 E2.27511 F4800
;WIPE_START
G1 F5760
G1 X106.351 Y111.147 E1.67511
;WIPE_END
G92 E0
G1 Z4.48 F7200
; AFTER_LAYER_CHANGE 21 @ 4.48mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.953 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.734 Y108.188 I0.040 J1.831 E2.35345
G1 X109.893 Y108.175 E2.35845
G1 X109.893 Y108.175 F7200
G1 X109.95 Y107.776
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.676 Y107.799 I0.049 J2.225 E2.82182
G1 X109.891 Y107.781 E2.82912
G1 X109.891 Y107.781 F7200
G1 X109.948 Y107.368
G1 F1500
G3 X109.616 Y107.396 I0.055 J2.633 E3.37738
G1 X109.888 Y107.373 E3.38662
G1 E1.98662 F4800
;WIPE_START
G1 F5760
G3 X110.637 Y107.455 I0.189 J1.738 E1.38662
;WIPE_END
G92 E0
G1 X112.235 Y108.052 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G3 X112.100 Y112.100 I-2.193 J1.953 E2.15118
G1 X113.649 Y113.649 E2.22533
G1 X113.649 Y112.108 E2.27749
G1 X112.108 Y113.649 E2.35126
G1 X107.892 Y113.649 E2.49397
G1 X106.351 Y112.108 E2.56774
G1 X106.351 Y113.649 E2.6199
G1 X107.902 Y112.098 E2.69415
G1 X108.483 Y112.564 E2.71936
G2 X111.948 Y112.235 I1.506 J-2.546 E2.84520
G1 X111.948 Y112.235 F7200
G1 X113.649 Y111.905
G1 F1500
G1 X113.649 Y107.892 E2.98104
G1 X112.108 Y106.351 E3.05481
G1 X113.649 Y106.351 E3.10697
G1 X112.102 Y107.898 E3.18102
G2 X109.946 Y107.025 I-2.082 J2.043 E3.26188
G1 X109.17 Y107.141 E3.28844
G2 X107.903 Y107.903 I0.642 J2.502 E3.33905
G1 X106.351 Y106.351 E3.41334
G1 X107.892 Y106.351 E3.4655
G1 X106.351 Y107.892 E3.53927
G1 X106.351 Y111.905 E3.67511
;LAYER_CHANGE
;Z:4.68
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 22 @ 4.68mm
G1 E2.27511 F4800
;WIPE_START
G1 F5760
G1 X106.351 Y111.147 E1.67511
;WIPE_END
G92 E0
G1 Z4.68 F7200
; AFTER_LAYER_CHANGE 22 @ 4.68mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.934 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.061 J1.831 E2.34669
G1 X109.875 Y108.179 E2.35846
G1 X109.875 Y108.179 F7200
G1 X109.918 Y107.775
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.402 Y107.855 I0.081 J2.225 E2.81346
G1 X109.859 Y107.785 E2.82911
G1 X109.859 Y107.785 F7200
G1 X109.901 Y107.366
G1 F1500
G3 X109.296 Y107.460 I0.099 J2.634 E3.36794
G1 X109.842 Y107.375 E3.38664
G1 E1.98664 F4800
;WIPE_START
G1 F5760
G1 X109.901 Y107.366 E1.93939
G3 X110.593 Y107.442 I0.162 J1.713 E1.38664
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:4.88
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 23 @ 4.88mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z4.88 F7200
; AFTER_LAYER_CHANGE 23 @ 4.88mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.923 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.074 J1.830 E2.34703
G1 X109.864 Y108.179 E2.35846
G1 X109.864 Y108.179 F7200
G1 X109.906 Y107.776
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.401 Y107.855 I0.089 J2.224 E2.81383
G1 X109.846 Y107.785 E2.82908
G1 X109.846 Y107.785 F7200
G1 X109.887 Y107.367
G1 F1500
G3 X109.294 Y107.460 I0.109 J2.633 E3.36831
G1 X109.828 Y107.376 E3.38661
G1 E1.98661 F4800
;WIPE_START
G1 F5760
G1 X109.887 Y107.367 E1.93936
G1 X110.46 Y107.405 E1.48474
G1 X110.579 Y107.439 E1.38661
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:5.08
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 24 @ 5.08mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z5.08 F7200
; AFTER_LAYER_CHANGE 24 @ 5.08mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.912 Y108.171 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.082 J1.830 E2.34740
G1 X109.853 Y108.18 E2.35848
G1 X109.853 Y108.18 F7200
G1 X109.893 Y107.777
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.400 Y107.856 I0.103 J2.223 E2.81424
G1 X109.834 Y107.786 E2.82912
G1 X109.834 Y107.786 F7200
G1 X109.873 Y107.367
G1 F1500
G3 X109.293 Y107.461 I0.129 J2.632 E3.36879
G1 X109.814 Y107.377 E3.38665
G1 E1.98665 F4800
;WIPE_START
G1 F5760
G1 X109.873 Y107.367 E1.93928
G1 X110.458 Y107.404 E1.47523
G1 X110.566 Y107.434 E1.38665
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:5.28
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 25 @ 5.28mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z5.28 F7200
; AFTER_LAYER_CHANGE 25 @ 5.28mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.901 Y108.171 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.096 J1.829 E2.34772
G1 X109.842 Y108.181 E2.35846
G1 X109.842 Y108.181 F7200
G1 X109.881 Y107.777
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.399 Y107.856 I0.117 J2.223 E2.81459
G1 X109.822 Y107.787 E2.8291
G1 X109.822 Y107.787 F7200
G1 X109.86 Y107.368
G1 F1500
G3 X109.291 Y107.461 I0.138 J2.632 E3.36914
G1 X109.8 Y107.378 E3.3866
G1 E1.9866 F4800
;WIPE_START
G1 F5760
G1 X109.86 Y107.368 E1.93844
G1 X110.456 Y107.404 E1.46575
G1 X110.552 Y107.431 E1.3866
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:5.48
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 26 @ 5.48mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z5.48 F7200
; AFTER_LAYER_CHANGE 26 @ 5.48mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.89 Y108.172 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.503 Y108.237 I0.108 J1.829 E2.34803
G1 X109.831 Y108.182 E2.35846
G1 X109.831 Y108.182 F7200
G1 X109.868 Y107.778
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.398 Y107.857 I0.132 J2.222 E2.81499
G1 X109.809 Y107.788 E2.8291
G1 X109.809 Y107.788 F7200
G1 X109.846 Y107.369
G1 F1500
G3 X109.290 Y107.462 I0.154 J2.631 E3.36957
G1 X109.787 Y107.379 E3.38663
G1 E1.98663 F4800
;WIPE_START
G1 F5760
G1 X109.846 Y107.369 E1.93926
G1 X110.455 Y107.403 E1.45638
G1 X110.54 Y107.427 E1.38663
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:5.68
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 27 @ 5.68mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z5.68 F7200
; AFTER_LAYER_CHANGE 27 @ 5.68mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.872 Y108.173 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.503 Y108.237 I0.127 J1.827 E2.34860
G1 X109.813 Y108.184 E2.35846
G1 X109.813 Y108.184 F7200
G1 X109.836 Y107.782
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.397 Y107.857 I0.153 J2.221 E2.81605
G1 X109.777 Y107.792 E2.8291
G1 X109.777 Y107.792 F7200
G1 X109.799 Y107.375
G1 F1500
G3 X109.288 Y107.463 I0.190 J2.628 E3.37110
G1 X109.74 Y107.385 E3.38663
G1 E1.98663 F4800
;WIPE_START
G1 F5760
G3 X110.494 Y107.414 I0.283 J2.452 E1.38663
;WIPE_END
G92 E0
G1 X112.235 Y108.052 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G3 X112.100 Y112.100 I-2.193 J1.953 E2.15118
G1 X113.649 Y113.649 E2.22533
G1 X113.649 Y112.108 E2.27749
G1 X112.108 Y113.649 E2.35126
G1 X107.892 Y113.649 E2.49397
G1 X106.351 Y112.108 E2.56774
G1 X106.351 Y113.649 E2.6199
G1 X107.902 Y112.098 E2.69415
G1 X108.483 Y112.564 E2.71936
G2 X111.948 Y112.235 I1.506 J-2.546 E2.84520
G1 X111.948 Y112.235 F7200
G1 X113.649 Y111.905
G1 F1500
G1 X113.649 Y107.892 E2.98104
G1 X112.108 Y106.351 E3.05481
G1 X113.649 Y106.351 E3.10697
G1 X112.102 Y107.898 E3.18102
G2 X107.903 Y107.903 I-2.097 J2.077 E3.33910
G1 X106.351 Y106.351 E3.41339
G1 X107.892 Y106.351 E3.46555
G1 X106.351 Y107.892 E3.53932
G1 X106.351 Y111.905 E3.67516
;LAYER_CHANGE
;Z:5.88
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 28 @ 5.88mm
G1 E2.27516 F4800
;WIPE_START
G1 F5760
G1 X106.351 Y111.147 E1.67516
;WIPE_END
G92 E0
G1 Z5.88 F7200
; AFTER_LAYER_CHANGE 28 @ 5.88mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.861 Y108.174 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.502 Y108.237 I0.136 J1.827 E2.34892
G1 X109.802 Y108.184 E2.35847
G1 X109.802 Y108.184 F7200
G1 X109.824 Y107.782
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.396 Y107.857 I0.168 J2.220 E2.81644
G1 X109.765 Y107.793 E2.82912
G1 X109.765 Y107.793 F7200
G1 X109.785 Y107.376
G1 F1500
G3 X109.286 Y107.463 I0.200 J2.623 E3.37153
G1 X109.726 Y107.386 E3.38665
G1 E1.98665 F4800
;WIPE_START
G1 F5760
G3 X110.481 Y107.411 I0.295 J2.504 E1.38665
;WIPE_END
G92 E0
G1 X112.235 Y108.052 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G3 X112.100 Y112.100 I-2.193 J1.953 E2.15118
G1 X113.649 Y113.649 E2.22533
G1 X113.649 Y112.108 E2.27749
G1 X112.108 Y113.649 E2.35126
G1 X107.892 Y113.649 E2.49397
G1 X106.351 Y112.108 E2.56774
G1 X106.351 Y113.649 E2.6199
G1 X107.902 Y112.098 E2.69415
G1 X108.483 Y112.564 E2.71936
G2 X111.948 Y112.235 I1.506 J-2.546 E2.84520
G1 X111.948 Y112.235 F7200
G1 X113.649 Y111.905
G1 F1500
G1 X113.649 Y107.892 E2.98104
G1 X112.108 Y106.351 E3.05481
G1 X113.649 Y106.351 E3.10697
G1 X112.102 Y107.898 E3.18102
G2 X107.903 Y107.903 I-2.097 J2.076 E3.33911
G1 X106.351 Y106.351 E3.4134
G1 X107.892 Y106.351 E3.46556
G1 X106.351 Y107.892 E3.53933
G1 X106.351 Y111.905 E3.67517
;LAYER_CHANGE
;Z:6.08
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 29 @ 6.08mm
G1 E2.27517 F4800
;WIPE_START
G1 F5760
G1 X106.351 Y111.147 E1.67517
;WIPE_END
G92 E0
G1 Z6.08 F7200
; AFTER_LAYER_CHANGE 29 @ 6.08mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.852 Y108.174 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.502 Y108.237 I0.148 J1.826 E2.34919
G1 X109.793 Y108.185 E2.35846
G1 X109.793 Y108.185 F7200
G1 X109.82 Y107.781
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.395 Y107.858 I0.182 J2.218 E2.81648
G1 X109.761 Y107.792 E2.82907
G1 X109.787 Y107.374 F7200
G1 F1500
G3 X109.284 Y107.464 I0.210 J2.626 E3.37130
G1 X109.728 Y107.384 E3.38657
G1 E1.98657 F4800
;WIPE_START
G1 F5760
G3 X110.481 Y107.421 I0.291 J1.755 E1.38657
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.096 Y112.096 E3.03726
G2 X112.096 Y107.904 I-2.045 J-2.096 E3.19538
G1 X113.649 Y106.351 E3.26972
G1 X112.108 Y106.351 E3.32188
G1 X113.649 Y107.892 E3.39565
G1 X113.649 Y111.905 E3.53149
;LAYER_CHANGE
;Z:6.28
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 30 @ 6.28mm
G1 E2.13149 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53149
;WIPE_END
G92 E0
G1 Z6.28 F7200
; AFTER_LAYER_CHANGE 30 @ 6.28mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.964 Y108.169 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.734 Y108.188 I0.036 J1.831 E2.35313
G1 X109.904 Y108.174 E2.35848
G1 X109.963 Y107.776 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.676 Y107.799 I0.034 J2.225 E2.82142
G1 X109.903 Y107.781 E2.82913
G1 X109.903 Y107.781 F7200
G1 X109.962 Y107.367
G1 F1500
G3 X109.617 Y107.396 I0.048 J2.634 E3.37697
G1 X109.902 Y107.372 E3.38665
G1 E1.98665 F4800
;WIPE_START
G1 F5760
G3 X110.651 Y107.459 I0.177 J1.740 E1.38665
;WIPE_END
G92 E0
G1 X112.235 Y108.052 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G3 X112.100 Y112.100 I-2.193 J1.953 E2.15118
G1 X113.649 Y113.649 E2.22533
G1 X113.649 Y112.108 E2.27749
G1 X112.108 Y113.649 E2.35126
G1 X107.892 Y113.649 E2.49397
G1 X106.351 Y112.108 E2.56774
G1 X106.351 Y113.649 E2.6199
G1 X107.902 Y112.098 E2.69415
G1 X108.483 Y112.564 E2.71936
G2 X111.948 Y112.235 I1.506 J-2.546 E2.84520
G1 X111.948 Y112.235 F7200
G1 X113.649 Y111.905
G1 F1500
G1 X113.649 Y107.892 E2.98104
G1 X112.108 Y106.351 E3.05481
G1 X113.649 Y106.351 E3.10697
G1 X112.102 Y107.898 E3.18102
G2 X109.961 Y107.024 I-2.084 J2.046 E3.26137
G1 X109.17 Y107.141 E3.28844
G2 X107.903 Y107.903 I0.642 J2.502 E3.33905
G1 X106.351 Y106.351 E3.41334
G1 X107.892 Y106.351 E3.4655
G1 X106.351 Y107.892 E3.53927
G1 X106.351 Y111.905 E3.67511
;LAYER_CHANGE
;Z:6.48
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 31 @ 6.48mm
G1 E2.27511 F4800
;WIPE_START
G1 F5760
G1 X106.351 Y111.147 E1.67511
;WIPE_END
G92 E0
G1 Z6.48 F7200
; AFTER_LAYER_CHANGE 31 @ 6.48mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.953 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.734 Y108.188 I0.040 J1.831 E2.35345
G1 X109.893 Y108.175 E2.35845
G1 X109.893 Y108.175 F7200
G1 X109.95 Y107.776
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.676 Y107.799 I0.049 J2.225 E2.82182
G1 X109.891 Y107.781 E2.82912
G1 X109.891 Y107.781 F7200
G1 X109.948 Y107.368
G1 F1500
G3 X109.616 Y107.396 I0.055 J2.633 E3.37738
G1 X109.888 Y107.373 E3.38662
G1 E1.98662 F4800
;WIPE_START
G1 F5760
G3 X110.637 Y107.455 I0.189 J1.738 E1.38662
;WIPE_END
G92 E0
G1 X112.235 Y108.052 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G3 X112.100 Y112.100 I-2.193 J1.953 E2.15118
G1 X113.649 Y113.649 E2.22533
G1 X113.649 Y112.108 E2.27749
G1 X112.108 Y113.649 E2.35126
G1 X107.892 Y113.649 E2.49397
G1 X106.351 Y112.108 E2.56774
G1 X106.351 Y113.649 E2.6199
G1 X107.902 Y112.098 E2.69415
G1 X108.483 Y112.564 E2.71936
G2 X111.948 Y112.235 I1.506 J-2.546 E2.84520
G1 X111.948 Y112.235 F7200
G1 X113.649 Y111.905
G1 F1500
G1 X113.649 Y107.892 E2.98104
G1 X112.108 Y106.351 E3.05481
G1 X113.649 Y106.351 E3.10697
G1 X112.102 Y107.898 E3.18102
G2 X109.946 Y107.025 I-2.082 J2.043 E3.26188
G1 X109.17 Y107.141 E3.28844
G2 X107.903 Y107.903 I0.642 J2.502 E3.33905
G1 X106.351 Y106.351 E3.41334
G1 X107.892 Y106.351 E3.4655
G1 X106.351 Y107.892 E3.53927
G1 X106.351 Y111.905 E3.67511
;LAYER_CHANGE
;Z:6.68
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 32 @ 6.68mm
G1 E2.27511 F4800
;WIPE_START
G1 F5760
G1 X106.351 Y111.147 E1.67511
;WIPE_END
G92 E0
G1 Z6.68 F7200
; AFTER_LAYER_CHANGE 32 @ 6.68mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.934 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.061 J1.831 E2.34669
G1 X109.875 Y108.179 E2.35846
G1 X109.875 Y108.179 F7200
G1 X109.918 Y107.775
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.402 Y107.855 I0.081 J2.225 E2.81346
G1 X109.859 Y107.785 E2.82911
G1 X109.859 Y107.785 F7200
G1 X109.901 Y107.366
G1 F1500
G3 X109.296 Y107.460 I0.099 J2.634 E3.36794
G1 X109.842 Y107.375 E3.38664
G1 E1.98664 F4800
;WIPE_START
G1 F5760
G1 X109.901 Y107.366 E1.93939
G3 X110.593 Y107.442 I0.162 J1.713 E1.38664
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:6.88
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 33 @ 6.88mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z6.88 F7200
; AFTER_LAYER_CHANGE 33 @ 6.88mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.923 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.074 J1.830 E2.34703
G1 X109.864 Y108.179 E2.35846
G1 X109.864 Y108.179 F7200
G1 X109.906 Y107.776
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.401 Y107.855 I0.089 J2.224 E2.81383
G1 X109.846 Y107.785 E2.82908
G1 X109.846 Y107.785 F7200
G1 X109.887 Y107.367
G1 F1500
G3 X109.294 Y107.460 I0.109 J2.633 E3.36831
G1 X109.828 Y107.376 E3.38661
G1 E1.98661 F4800
;WIPE_START
G1 F5760
G1 X109.887 Y107.367 E1.93936
G1 X110.46 Y107.405 E1.48474
G1 X110.579 Y107.439 E1.38661
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:7.08
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 34 @ 7.08mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z7.08 F7200
; AFTER_LAYER_CHANGE 34 @ 7.08mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.912 Y108.171 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.082 J1.830 E2.34740
G1 X109.853 Y108.18 E2.35848
G1 X109.853 Y108.18 F7200
G1 X109.893 Y107.777
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.400 Y107.856 I0.103 J2.223 E2.81424
G1 X109.834 Y107.786 E2.82912
G1 X109.834 Y107.786 F7200
G1 X109.873 Y107.367
G1 F1500
G3 X109.293 Y107.461 I0.129 J2.632 E3.36879
G1 X109.814 Y107.377 E3.38665
G1 E1.98665 F4800
;WIPE_START
G1 F5760
G1 X109.873 Y107.367 E1.93928
G1 X110.458 Y107.404 E1.47523
G1 X110.566 Y107.434 E1.38665
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:7.28
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 35 @ 7.28mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z7.28 F7200
; AFTER_LAYER_CHANGE 35 @ 7.28mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.901 Y108.171 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.504 Y108.236 I0.096 J1.829 E2.34772
G1 X109.842 Y108.181 E2.35846
G1 X109.842 Y108.181 F7200
G1 X109.881 Y107.777
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.399 Y107.856 I0.117 J2.223 E2.81459
G1 X109.822 Y107.787 E2.8291
G1 X109.822 Y107.787 F7200
G1 X109.86 Y107.368
G1 F1500
G3 X109.291 Y107.461 I0.138 J2.632 E3.36914
G1 X109.8 Y107.378 E3.3866
G1 E1.9866 F4800
;WIPE_START
G1 F5760
G1 X109.86 Y107.368 E1.93844
G1 X110.456 Y107.404 E1.46575
G1 X110.552 Y107.431 E1.3866
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:7.48
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 36 @ 7.48mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z7.48 F7200
; AFTER_LAYER_CHANGE 36 @ 7.48mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.89 Y108.172 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.503 Y108.237 I0.108 J1.829 E2.34803
G1 X109.831 Y108.182 E2.35846
G1 X109.831 Y108.182 F7200
G1 X109.868 Y107.778
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.398 Y107.857 I0.132 J2.222 E2.81499
G1 X109.809 Y107.788 E2.8291
G1 X109.809 Y107.788 F7200
G1 X109.846 Y107.369
G1 F1500
G3 X109.290 Y107.462 I0.154 J2.631 E3.36957
G1 X109.787 Y107.379 E3.38663
G1 E1.98663 F4800
;WIPE_START
G1 F5760
G1 X109.846 Y107.369 E1.93926
G1 X110.455 Y107.403 E1.45638
G1 X110.54 Y107.427 E1.38663
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.1 Y112.1 E3.03707
G2 X112.102 Y107.898 I-2.075 J-2.102 E3.19514
G1 X113.649 Y106.351 E3.26919
G1 X112.108 Y106.351 E3.32135
G1 X113.649 Y107.892 E3.39512
G1 X113.649 Y111.905 E3.53096
;LAYER_CHANGE
;Z:7.68
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 37 @ 7.68mm
G1 E2.13096 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53096
;WIPE_END
G92 E0
G1 Z7.68 F7200
; AFTER_LAYER_CHANGE 37 @ 7.68mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.872 Y108.173 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.503 Y108.237 I0.127 J1.827 E2.34860
G1 X109.813 Y108.184 E2.35846
G1 X109.813 Y108.184 F7200
G1 X109.836 Y107.782
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.397 Y107.857 I0.153 J2.221 E2.81605
G1 X109.777 Y107.792 E2.8291
G1 X109.777 Y107.792 F7200
G1 X109.799 Y107.375
G1 F1500
G3 X109.288 Y107.463 I0.190 J2.628 E3.37110
G1 X109.74 Y107.385 E3.38663
G1 E1.98663 F4800
;WIPE_START
G1 F5760
G3 X110.494 Y107.414 I0.283 J2.452 E1.38663
;WIPE_END
G92 E0
G1 X112.235 Y108.052 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G3 X112.100 Y112.100 I-2.193 J1.953 E2.15118
G1 X113.649 Y113.649 E2.22533
G1 X113.649 Y112.108 E2.27749
G1 X112.108 Y113.649 E2.35126
G1 X107.892 Y113.649 E2.49397
G1 X106.351 Y112.108 E2.56774
G1 X106.351 Y113.649 E2.6199
G1 X107.902 Y112.098 E2.69415
G1 X108.483 Y112.564 E2.71936
G2 X111.948 Y112.235 I1.506 J-2.546 E2.84520
G1 X111.948 Y112.235 F7200
G1 X113.649 Y111.905
G1 F1500
G1 X113.649 Y107.892 E2.98104
G1 X112.108 Y106.351 E3.05481
G1 X113.649 Y106.351 E3.10697
G1 X112.102 Y107.898 E3.18102
G2 X107.903 Y107.903 I-2.097 J2.077 E3.33910
G1 X106.351 Y106.351 E3.41339
G1 X107.892 Y106.351 E3.46555
G1 X106.351 Y107.892 E3.53932
G1 X106.351 Y111.905 E3.67516
;LAYER_CHANGE
;Z:7.88
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 38 @ 7.88mm
G1 E2.27516 F4800
;WIPE_START
G1 F5760
G1 X106.351 Y111.147 E1.67516
;WIPE_END
G92 E0
G1 Z7.88 F7200
; AFTER_LAYER_CHANGE 38 @ 7.88mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.861 Y108.174 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.502 Y108.237 I0.136 J1.827 E2.34892
G1 X109.802 Y108.184 E2.35847
G1 X109.802 Y108.184 F7200
G1 X109.824 Y107.782
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.396 Y107.857 I0.168 J2.220 E2.81644
G1 X109.765 Y107.793 E2.82912
G1 X109.765 Y107.793 F7200
G1 X109.785 Y107.376
G1 F1500
G3 X109.286 Y107.463 I0.200 J2.623 E3.37153
G1 X109.726 Y107.386 E3.38665
G1 E1.98665 F4800
;WIPE_START
G1 F5760
G3 X110.481 Y107.411 I0.295 J2.504 E1.38665
;WIPE_END
G92 E0
G1 X112.235 Y108.052 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G3 X112.100 Y112.100 I-2.193 J1.953 E2.15118
G1 X113.649 Y113.649 E2.22533
G1 X113.649 Y112.108 E2.27749
G1 X112.108 Y113.649 E2.35126
G1 X107.892 Y113.649 E2.49397
G1 X106.351 Y112.108 E2.56774
G1 X106.351 Y113.649 E2.6199
G1 X107.902 Y112.098 E2.69415
G1 X108.483 Y112.564 E2.71936
G2 X111.948 Y112.235 I1.506 J-2.546 E2.84520
G1 X111.948 Y112.235 F7200
G1 X113.649 Y111.905
G1 F1500
G1 X113.649 Y107.892 E2.98104
G1 X112.108 Y106.351 E3.05481
G1 X113.649 Y106.351 E3.10697
G1 X112.102 Y107.898 E3.18102
G2 X107.903 Y107.903 I-2.097 J2.076 E3.33911
G1 X106.351 Y106.351 E3.4134
G1 X107.892 Y106.351 E3.46556
G1 X106.351 Y107.892 E3.53933
G1 X106.351 Y111.905 E3.67517
;LAYER_CHANGE
;Z:8.08
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 39 @ 8.08mm
G1 E2.27517 F4800
;WIPE_START
G1 F5760
G1 X106.351 Y111.147 E1.67517
;WIPE_END
G92 E0
G1 Z8.08 F7200
; AFTER_LAYER_CHANGE 39 @ 8.08mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.852 Y108.174 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.502 Y108.237 I0.148 J1.826 E2.34919
G1 X109.793 Y108.185 E2.35846
G1 X109.793 Y108.185 F7200
G1 X109.82 Y107.781
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.395 Y107.858 I0.182 J2.218 E2.81648
G1 X109.761 Y107.792 E2.82907
G1 X109.787 Y107.374 F7200
G1 F1500
G3 X109.284 Y107.464 I0.210 J2.626 E3.37130
G1 X109.728 Y107.384 E3.38657
G1 E1.98657 F4800
;WIPE_START
G1 F5760
G3 X110.481 Y107.421 I0.291 J1.755 E1.38657
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.903 Y107.903 E2.33606
G1 X107.412 Y108.525 E2.36288
G2 X107.902 Y112.098 I2.553 J1.470 E2.49410
G1 X106.351 Y113.649 E2.56835
G1 X106.351 Y112.108 E2.62051
G1 X107.892 Y113.649 E2.69428
G1 X112.108 Y113.649 E2.83699
G1 X113.649 Y112.108 E2.91076
G1 X113.649 Y113.649 E2.96292
G1 X112.096 Y112.096 E3.03726
G2 X112.096 Y107.904 I-2.045 J-2.096 E3.19538
G1 X113.649 Y106.351 E3.26972
G1 X112.108 Y106.351 E3.32188
G1 X113.649 Y107.892 E3.39565
G1 X113.649 Y111.905 E3.53149
;LAYER_CHANGE
;Z:8.28
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 40 @ 8.28mm
G1 E2.13149 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53149
;WIPE_END
G92 E0
G1 Z8.28 F7200
; AFTER_LAYER_CHANGE 40 @ 8.28mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.965 Y108.168 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.612 Y108.210 I0.039 J1.832 E2.34920
G1 X109.905 Y108.175 E2.35845
G1 X109.905 Y108.175 F7200
G1 X109.957 Y107.775
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.529 Y107.825 I0.043 J2.225 E2.81649
G1 X109.898 Y107.782 E2.82906
G1 X109.898 Y107.782 F7200
G1 X109.95 Y107.366
G1 F1500
G3 X109.442 Y107.425 I0.049 J2.634 E3.37125
G1 X109.89 Y107.373 E3.38652
G1 E1.98652 F4800
;WIPE_START
G1 F5760
G3 X110.639 Y107.455 I0.187 J1.758 E1.38652
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.896 Y107.896 E2.33573
G2 X107.082 Y109.410 I2.047 J2.076 E2.39470
G1 X107.03 Y110.206 E2.4217
G2 X107.902 Y112.098 I2.861 J-0.172 E2.49379
G1 X106.351 Y113.649 E2.56804
G1 X106.351 Y112.108 E2.6202
G1 X107.892 Y113.649 E2.69397
G1 X112.108 Y113.649 E2.83668
G1 X113.649 Y112.108 E2.91045
G1 X113.649 Y113.649 E2.96261
G1 X112.099 Y112.099 E3.03681
G2 X112.102 Y107.898 I-2.071 J-2.102 E3.19489
G1 X113.649 Y106.351 E3.26894
G1 X112.108 Y106.351 E3.3211
G1 X113.649 Y107.892 E3.39487
G1 X113.649 Y111.905 E3.53071
;LAYER_CHANGE
;Z:8.48
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 41 @ 8.48mm
G1 E2.13071 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53071
;WIPE_END
G92 E0
G1 Z8.48 F7200
; AFTER_LAYER_CHANGE 41 @ 8.48mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.959 Y108.169 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.610 Y108.210 I0.038 J1.831 E2.34933
G1 X109.899 Y108.176 E2.35845
G1 X109.899 Y108.176 F7200
G1 X109.95 Y107.775
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.533 Y107.825 I0.055 J2.225 E2.81689
G1 X109.891 Y107.782 E2.82909
G1 X109.891 Y107.782 F7200
G1 X109.941 Y107.366
G1 F1500
G3 X109.453 Y107.424 I0.066 J2.634 E3.37196
G1 X109.882 Y107.373 E3.38658
G1 E1.98658 F4800
;WIPE_START
G1 F5760
G3 X110.631 Y107.454 I0.190 J1.743 E1.38658
;WIPE_END
G92 E0
G1 X107.755 Y108.043 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G2 X107.901 Y112.099 I2.223 J1.951 E2.15122
G1 X106.351 Y113.649 E2.22542
G1 X106.351 Y112.108 E2.27758
G1 X107.892 Y113.649 E2.35135
G1 X112.108 Y113.649 E2.49406
G1 X113.649 Y112.108 E2.56783
G1 X113.649 Y113.649 E2.61999
G1 X112.099 Y112.099 E2.69419
G3 X108.045 Y112.241 I-2.102 J-2.071 E2.84544
G1 X108.045 Y112.241 F7200
G1 X106.351 Y111.905
G1 F1500
G1 X106.351 Y107.892 E2.98128
G1 X107.892 Y106.351 E3.05505
G1 X106.351 Y106.351 E3.10721
G1 X107.903 Y107.903 E3.1815
G3 X108.650 Y107.347 I1.785 J1.618 E3.21316
G1 X109.386 Y107.088 E3.23957
G3 X112.101 Y107.899 I0.622 J2.867 E3.33951
G1 X113.649 Y106.351 E3.41361
G1 X112.108 Y106.351 E3.46577
G1 X113.649 Y107.892 E3.53954
G1 X113.649 Y111.905 E3.67538
;LAYER_CHANGE
;Z:8.68
;HEIGHT:0.200001
; BEFORE_LAYER_CHANGE 42 @ 8.68mm
G1 E2.27538 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.67538
;WIPE_END
G92 E0
G1 Z8.68 F7200
; AFTER_LAYER_CHANGE 42 @ 8.68mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.953 Y108.169 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.600 Y108.212 I0.044 J1.831 E2.34917
G1 X109.894 Y108.176 E2.35846
G1 X109.894 Y108.176 F7200
G1 X109.943 Y107.775
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.514 Y107.828 I0.057 J2.225 E2.81645
G1 X109.883 Y107.782 E2.82904
G1 X109.883 Y107.782 F7200
G1 X109.933 Y107.366
G1 F1500
G3 X109.425 Y107.429 I0.069 J2.634 E3.37119
G1 X109.873 Y107.373 E3.38647
G1 E1.98647 F4800
;WIPE_START
G1 F5760
G3 X110.623 Y107.452 I0.191 J1.784 E1.38647
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.897 Y107.897 E2.33578
G2 X107.901 Y112.099 I2.077 J2.099 E2.49387
G1 X106.351 Y113.649 E2.56807
G1 X106.351 Y112.108 E2.62023
G1 X107.892 Y113.649 E2.694
G1 X112.108 Y113.649 E2.83671
G1 X113.649 Y112.108 E2.91048
G1 X113.649 Y113.649 E2.96264
G1 X112.099 Y112.099 E3.03684
G2 X112.101 Y107.899 I-2.070 J-2.101 E3.19488
G1 X113.649 Y106.351 E3.26898
G1 X112.108 Y106.351 E3.32114
G1 X113.649 Y107.892 E3.39491
G1 X113.649 Y111.905 E3.53075
;LAYER_CHANGE
;Z:8.88
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 43 @ 8.88mm
G1 E2.13075 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53075
;WIPE_END
G92 E0
G1 Z8.88 F7200
; AFTER_LAYER_CHANGE 43 @ 8.88mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.947 Y108.169 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.595 Y108.214 I0.055 J1.831 E2.34917
G1 X109.888 Y108.177 E2.35843
G1 X109.888 Y108.177 F7200
G1 X109.936 Y107.775
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.507 Y107.829 I0.062 J2.225 E2.81642
G1 X109.876 Y107.783 E2.82901
G1 X109.876 Y107.783 F7200
G1 X109.924 Y107.366
G1 F1500
G3 X109.417 Y107.431 I0.080 J2.634 E3.37116
G1 X109.865 Y107.374 E3.38645
G1 E1.98645 F4800
;WIPE_START
G1 F5760
G3 X110.615 Y107.450 I0.203 J1.739 E1.38645
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.898 Y107.898 E2.33582
G2 X107.901 Y112.099 I2.068 J2.099 E2.49391
G1 X106.351 Y113.649 E2.56811
G1 X106.351 Y112.108 E2.62027
G1 X107.892 Y113.649 E2.69404
G1 X112.108 Y113.649 E2.83675
G1 X113.649 Y112.108 E2.91052
G1 X113.649 Y113.649 E2.96268
G1 X112.101 Y112.101 E3.03678
G2 X112.100 Y107.900 I-2.070 J-2.100 E3.19487
G1 X113.649 Y106.351 E3.26902
G1 X112.108 Y106.351 E3.32118
G1 X113.649 Y107.892 E3.39495
G1 X113.649 Y111.905 E3.53079
;LAYER_CHANGE
;Z:9.08
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 44 @ 9.08mm
G1 E2.13079 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53079
;WIPE_END
G92 E0
G1 Z9.08 F7200
; AFTER_LAYER_CHANGE 44 @ 9.08mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.94 Y108.169 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.532 Y108.229 I0.061 J1.831 E2.34739
G1 X109.88 Y108.178 E2.35842
G1 X109.88 Y108.178 F7200
G1 X109.924 Y107.775
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.434 Y107.847 I0.077 J2.225 E2.81429
G1 X109.864 Y107.784 E2.829
G1 X109.864 Y107.784 F7200
G1 X109.907 Y107.366
G1 F1500
G3 X109.332 Y107.450 I0.091 J2.633 E3.36883
G1 X109.848 Y107.375 E3.38648
G1 E1.98648 F4800
;WIPE_START
G1 F5760
G1 X109.907 Y107.366 E1.93923
G3 X110.598 Y107.446 I0.144 J1.781 E1.38648
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.902 Y107.902 E2.33602
G1 X107.436 Y108.484 E2.36126
G2 X107.900 Y112.100 I2.538 J1.512 E2.49406
G1 X106.351 Y113.649 E2.56821
G1 X106.351 Y112.108 E2.62037
G1 X107.892 Y113.649 E2.69414
G1 X112.108 Y113.649 E2.83685
G1 X113.649 Y112.108 E2.91062
G1 X113.649 Y113.649 E2.96278
G1 X112.098 Y112.098 E3.03703
G2 X112.100 Y107.900 I-2.064 J-2.100 E3.19508
G1 X113.649 Y106.351 E3.26923
G1 X112.108 Y106.351 E3.32139
G1 X113.649 Y107.892 E3.39516
G1 X113.649 Y111.905 E3.531
;LAYER_CHANGE
;Z:9.28
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 45 @ 9.28mm
G1 E2.131 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.531
;WIPE_END
G92 E0
G1 Z9.28 F7200
; AFTER_LAYER_CHANGE 45 @ 9.28mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.935 Y108.169 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.583 Y108.216 I0.065 J1.831 E2.34917
G1 X109.876 Y108.177 E2.35844
G1 X109.876 Y108.177 F7200
G1 X109.921 Y107.776
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.493 Y107.833 I0.078 J2.224 E2.81642
G1 X109.862 Y107.784 E2.82902
G1 X109.862 Y107.784 F7200
G1 X109.907 Y107.367
G1 F1500
G3 X109.400 Y107.434 I0.090 J2.633 E3.37114
G1 X109.848 Y107.375 E3.38644
G1 E1.98644 F4800
;WIPE_START
G1 F5760
G3 X110.598 Y107.446 I0.210 J1.779 E1.38644
;WIPE_END
G92 E0
G1 X106.351 Y111.905 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G1 X106.351 Y107.892 E2.13584
G1 X107.892 Y106.351 E2.20961
G1 X106.351 Y106.351 E2.26177
G1 X107.899 Y107.899 E2.33587
G2 X107.900 Y112.100 I2.070 J2.100 E2.49395
G1 X106.351 Y113.649 E2.5681
G1 X106.351 Y112.108 E2.62026
G1 X107.892 Y113.649 E2.69403
G1 X112.108 Y113.649 E2.83674
G1 X113.649 Y112.108 E2.91051
G1 X113.649 Y113.649 E2.96267
G1 X112.098 Y112.098 E3.03692
G1 X112.568 Y111.51 E3.0624
G2 X112.099 Y107.901 I-2.538 J-1.505 E3.19496
G1 X113.649 Y106.351 E3.26916
G1 X112.108 Y106.351 E3.32132
G1 X113.649 Y107.892 E3.39509
G1 X113.649 Y111.905 E3.53093
;LAYER_CHANGE
;Z:9.48
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 46 @ 9.48mm
G1 E2.13093 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.53093
;WIPE_END
G92 E0
G1 Z9.48 F7200
; AFTER_LAYER_CHANGE 46 @ 9.48mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1500
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.929 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1500
G3 X109.577 Y108.218 I0.070 J1.830 E2.34913
G1 X109.87 Y108.178 E2.3584
G1 X109.87 Y108.178 F7200
G1 X109.914 Y107.776
;TYPE:Perimeter
;WIDTH:0.45
G1 F1500
G3 X109.486 Y107.834 I0.083 J2.224 E2.81638
G1 X109.855 Y107.784 E2.82898
G1 X109.855 Y107.784 F7200
G1 X109.898 Y107.367
G1 F1500
G3 X109.392 Y107.436 I0.101 J2.633 E3.37117
G1 X109.839 Y107.375 E3.38644
G1 E1.98644 F4800
;WIPE_START
G1 F5760
G3 X110.589 Y107.444 I0.218 J1.737 E1.38644
;WIPE_END
G92 E0
G1 X107.762 Y108.048 F7200
G1 E2 F4800
;TYPE:Internal infill
G1 F1500
G2 X107.900 Y112.100 I2.205 J1.953 E2.15124
G1 X106.351 Y113.649 E2.22539
G1 X106.351 Y112.108 E2.27755
G1 X107.892 Y113.649 E2.35132
G1 X112.108 Y113.649 E2.49403
G1 X113.649 Y112.108 E2.5678
G1 X113.649 Y113.649 E2.61996
G1 X112.103 Y112.103 E2.69397
G3 X108.048 Y112.239 I-2.099 J-2.078 E2.84521
G1 X108.048 Y112.239 F7200
G1 X106.351 Y111.905
G1 F1500
G1 X106.351 Y107.892 E2.98105
G1 X107.892 Y106.351 E3.05482
G1 X106.351 Y106.351 E3.10698
G1 X107.899 Y107.899 E3.18108
G3 X112.099 Y107.901 I2.099 J2.073 E3.33913
G1 X113.649 Y106.351 E3.41333
G1 X112.108 Y106.351 E3.46549
G1 X113.649 Y107.892 E3.53926
G1 X113.649 Y111.905 E3.6751
;LAYER_CHANGE
;Z:9.68
;HEIGHT:0.200001
; BEFORE_LAYER_CHANGE 47 @ 9.68mm
G1 E2.2751 F4800
;WIPE_START
G1 F5760
G1 X113.649 Y111.147 E1.6751
;WIPE_END
G92 E0
G1 Z9.68 F7200
; AFTER_LAYER_CHANGE 47 @ 9.68mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1527
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1527
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1527
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.923 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1527
G3 X109.571 Y108.219 I0.075 J1.830 E2.34918
G1 X109.864 Y108.178 E2.35846
G1 X109.907 Y107.776 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1527
G3 X109.479 Y107.836 I0.094 J2.224 E2.81646
G1 X109.848 Y107.784 E2.82907
G1 X109.848 Y107.784 F7200
G1 X109.89 Y107.368
G1 F1527
G3 X109.384 Y107.438 I0.106 J2.633 E3.37124
G1 X109.831 Y107.376 E3.38652
G1 X109.831 Y107.376 F7200
G1 X109.914 Y106.418
;TYPE:Solid infill
;WIDTH:0.60673
G1 F1527
G2 X110.740 Y106.412 I0.388 J-3.464 E3.42529
;WIDTH:0.571153
G1 X110.92 Y106.394 E3.43324
;WIDTH:0.535576
G1 X111.099 Y106.376 E3.44061
;WIDTH:0.499999
G1 X113.624 Y106.376 E3.53658
G1 X113.624 Y108.563 E3.6197
;WIDTH:0.543107
G1 X113.602 Y108.781 E3.62881
;WIDTH:0.586215
G1 X113.58 Y108.999 E3.63871
;WIDTH:0.629323
G2 X113.580 Y109.857 I3.311 J0.429 E3.68061
;WIDTH:0.586254
G1 X113.586 Y110.701 E3.71874
;WIDTH:0.575501
G1 X113.605 Y110.959 E3.7302
;WIDTH:0.53775
G1 X113.624 Y111.217 E3.74084
;WIDTH:0.499999
G1 X113.624 Y113.624 E3.83232
G1 X111.318 Y113.624 E3.91996
;WIDTH:0.538859
G1 X111.101 Y113.604 E3.92895
;WIDTH:0.577719
G1 X110.884 Y113.585 E3.93864
;WIDTH:0.616579
G2 X110.024 Y113.582 I-0.443 J3.615 E3.97971
;WIDTH:0.612396
G2 X109.197 Y113.586 I-0.398 J3.192 E4.01892
;WIDTH:0.574931
G1 X109.017 Y113.605 E4.02693
;WIDTH:0.537465
G1 X108.838 Y113.624 E4.03433
;WIDTH:0.499999
G1 X106.376 Y113.624 E4.1279
G1 X106.376 Y111.364 E4.21379
;WIDTH:0.539231
G1 X106.396 Y111.136 E4.22324
;WIDTH:0.578463
G1 X106.416 Y110.908 E4.23343
;WIDTH:0.617694
G2 X106.418 Y110.032 I-4.000 J-0.447 E4.27534
;WIDTH:0.611576
G2 X106.414 Y109.205 I-3.394 J-0.397 E4.31449
;WIDTH:0.574384
G1 X106.395 Y109.026 E4.32244
;WIDTH:0.537192
G1 X106.376 Y108.846 E4.32988
;WIDTH:0.499999
G1 X106.376 Y106.376 E4.42376
G1 X108.619 Y106.376 E4.50901
;WIDTH:0.541054
G1 X108.836 Y106.397 E4.51804
;WIDTH:0.582109
G1 X109.053 Y106.417 E4.52781
;WIDTH:0.623164
G2 X109.686 Y106.425 I0.348 J-2.468 E4.55841
G1 X109.686 Y106.425 F7200
G1 X108.613 Y106.834
;WIDTH:0.499999
G1 F1527
G2 X106.834 Y108.627 I1.348 J3.116 E4.65664
G1 X106.834 Y106.834 E4.72479
G1 X108.384 Y106.834 E4.7837
G1 X108.384 Y106.834 F7200
G1 X109.62 Y106.991
;WIDTH:0.595276
G1 F1527
G2 X108.994 Y107.162 I-0.017 J1.169 E4.81379
;WIDTH:0.547638
G1 X108.727 Y107.281 E4.82606
;WIDTH:0.499999
G2 X107.186 Y108.955 I1.273 J2.718 E4.91462
;WIDTH:0.5341
G1 X107.12 Y109.141 E4.92268
;WIDTH:0.5682
G1 X107.053 Y109.328 E4.93136
;WIDTH:0.6023
G1 X106.986 Y109.514 E4.94056
G1 X106.958 Y110.104 E4.96803
;WIDTH:0.593472
G1 X107.032 Y110.697 E4.99539
G1 X107.154 Y110.979 E5.00946
;WIDTH:0.546736
G1 X107.276 Y111.262 E5.02237
;WIDTH:0.499999
G2 X108.947 Y112.811 I2.725 J-1.264 E5.11105
;WIDTH:0.534321
G1 X109.134 Y112.878 E5.11917
;WIDTH:0.568643
G1 X109.32 Y112.946 E5.12783
;WIDTH:0.602964
G1 X109.506 Y113.013 E5.13704
G1 X110.096 Y113.042 E5.16455
;WIDTH:0.594373
G1 X110.683 Y112.971 E5.19166
G1 X110.952 Y112.857 E5.20506
;WIDTH:0.547186
G1 X111.221 Y112.742 E5.21733
;WIDTH:0.499999
G2 X112.794 Y111.098 I-1.213 J-2.735 E5.30589
;WIDTH:0.536668
G1 X112.863 Y110.918 E5.3138
;WIDTH:0.573337
G1 X112.933 Y110.738 E5.32232
;WIDTH:0.610005
G1 X113.002 Y110.558 E5.33141
G1 X113.036 Y109.779 E5.36818
;WIDTH:0.595962
G1 X112.946 Y109.213 E5.39453
G1 X112.822 Y108.948 E5.40798
;WIDTH:0.547981
G1 X112.698 Y108.683 E5.42027
;WIDTH:0.499999
G2 X111.000 Y107.170 I-2.693 J1.313 E5.50878
;WIDTH:0.549206
G1 X110.718 Y107.075 E5.52131
;WIDTH:0.598413
G1 X110.437 Y106.981 E5.535
G1 X109.847 Y106.959 E5.56227
G1 X109.847 Y106.959 F7200
G1 X111.367 Y106.834
;WIDTH:0.499999
G1 F1527
G1 X113.167 Y106.834 E5.63068
G1 X113.167 Y108.623 E5.69867
G2 X111.571 Y106.937 I-3.010 J1.251 E5.78879
G1 E4.38879 F4800
;WIPE_START
G1 F5760
G3 X112.207 Y107.345 I-0.879 J2.070 E3.78879
;WIPE_END
G92 E0
G1 X113.167 Y111.381 F7200
G1 E2 F4800
G1 F1527
G1 X113.167 Y113.167 E2.06788
G1 X111.386 Y113.167 E2.13557
G2 X113.061 Y111.584 I-1.304 J-3.058 E2.22487
G1 E.82487 F4800
;WIPE_START
G1 F5760
G3 X112.636 Y112.207 I-1.847 J-0.804 E0.22487
;WIPE_END
G92 E0
G1 X106.834 Y111.616 F7200
G1 E2 F4800
G1 F1527
G1 X106.834 Y113.167 E2.05895
G1 X108.626 Y113.167 E2.12706
G3 X106.834 Y111.387 I1.331 J-3.132 E2.22524
;LAYER_CHANGE
;Z:9.88
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 48 @ 9.88mm
G1 E.82524 F4800
;WIPE_START
G1 F5760
G1 X107.214 Y112.042 E.22524
;WIPE_END
G92 E0
G1 Z9.88 F7200
; AFTER_LAYER_CHANGE 48 @ 9.88mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1549
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1549
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1549
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.918 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1549
G3 X109.566 Y108.220 I0.080 J1.830 E2.34919
G1 X109.858 Y108.178 E2.35844
G1 X109.858 Y108.178 F7200
G1 X109.9 Y107.776
;TYPE:Perimeter
;WIDTH:0.45
G1 F1549
G3 X109.472 Y107.838 I0.104 J2.223 E2.81642
G1 X109.84 Y107.785 E2.829
G1 X109.84 Y107.785 F7200
G1 X109.881 Y107.368
G1 F1549
G3 X109.375 Y107.440 I0.116 J2.631 E3.37122
G1 X109.822 Y107.376 E3.3865
G1 E1.9865 F4800
;WIPE_START
G1 F5760
G3 X110.573 Y107.440 I0.231 J1.733 E1.38650
;WIPE_END
G92 E0
G1 X106.418 Y110.063 F7200
G1 E2 F4800
;TYPE:Solid infill
;WIDTH:0.610269
G1 F1549
G2 X106.413 Y109.218 I-3.332 J-0.403 E2.03992
;WIDTH:0.573513
G1 X106.395 Y109.037 E2.04794
;WIDTH:0.536756
G1 X106.376 Y108.857 E2.05537
;WIDTH:0.499999
G1 X106.376 Y106.376 E2.14966
G1 X108.608 Y106.376 E2.23449
;WIDTH:0.541443
G1 X108.825 Y106.397 E2.24353
;WIDTH:0.582887
G1 X109.042 Y106.418 E2.25332
;WIDTH:0.62433
G2 X109.903 Y106.418 I0.430 J-3.327 E2.29501
;WIDTH:0.605794
G2 X110.729 Y106.412 I0.386 J-3.685 E2.33372
;WIDTH:0.570529
G1 X110.909 Y106.394 E2.34166
;WIDTH:0.535264
G1 X111.088 Y106.376 E2.34902
;WIDTH:0.499999
G1 X113.624 Y106.376 E2.4454
G1 X113.624 Y108.552 E2.5281
;WIDTH:0.543526
G1 X113.602 Y108.77 E2.53722
;WIDTH:0.587053
G1 X113.58 Y108.988 E2.54713
;WIDTH:0.630579
G2 X113.581 Y109.850 I3.144 J0.427 E2.58933
;WIDTH:0.601501
G2 X113.590 Y110.675 I3.842 J0.371 E2.62769
;WIDTH:0.567667
G1 X113.607 Y110.855 E2.63558
;WIDTH:0.533833
G1 X113.624 Y111.034 E2.64292
;WIDTH:0.499999
G1 X113.624 Y113.624 E2.74136
G1 X111.503 Y113.624 E2.82197
;WIDTH:0.546566
G1 X111.286 Y113.6 E2.83111
;WIDTH:0.593132
G1 X111.068 Y113.577 E2.84114
;WIDTH:0.639698
G2 X110.423 Y113.568 I-0.355 J2.313 E2.87322
;WIDTH:0.61168
G1 X109.994 Y113.582 E2.89352
;WIDTH:0.583662
G1 X109.365 Y113.586 E2.9218
;WIDTH:0.575198
G1 X109.096 Y113.605 E2.93374
;WIDTH:0.537599
G1 X108.827 Y113.624 E2.94483
;WIDTH:0.499999
G1 X106.376 Y113.624 E3.03798
G1 X106.376 Y111.362 E3.12395
;WIDTH:0.540344
G1 X106.397 Y111.144 E3.13301
;WIDTH:0.580689
G1 X106.417 Y110.927 E3.14275
;WIDTH:0.621033
G2 X106.425 Y110.291 I-2.621 J-0.351 E3.17338
G1 X106.425 Y110.291 F7200
G1 X106.834 Y111.387
;WIDTH:0.499999
G1 F1549
G2 X108.625 Y113.167 I3.131 J-1.360 E3.27153
G1 X106.834 Y113.167 E3.3396
G1 X106.834 Y111.615 E3.39859
G1 X106.834 Y111.615 F7200
G1 X106.989 Y110.36
;WIDTH:0.594991
G1 F1549
G2 X107.156 Y110.989 I1.171 J0.026 E3.42876
;WIDTH:0.547495
G1 X107.274 Y111.257 E3.44105
;WIDTH:0.499999
G2 X108.938 Y112.808 I2.731 J-1.262 E3.52957
;WIDTH:0.534593
G1 X109.124 Y112.876 E3.53767
;WIDTH:0.569187
G1 X109.31 Y112.944 E3.54634
;WIDTH:0.603781
G1 X109.496 Y113.012 E3.55558
G1 X110.076 Y113.041 E3.58266
;WIDTH:0.612727
G1 X110.442 Y113 E3.60011
;WIDTH:0.639698
G1 X110.808 Y112.96 E3.61838
G1 X110.864 Y112.924 E3.62168
;WIDTH:0.598968
G1 X111.116 Y112.798 E3.63471
;WIDTH:0.549484
G1 X111.369 Y112.672 E3.64662
;WIDTH:0.499999
G2 X112.849 Y110.944 I-1.368 J-2.669 E3.73516
;WIDTH:0.547154
G1 X112.937 Y110.661 E3.74759
;WIDTH:0.594308
G1 X113.025 Y110.378 E3.76118
G1 X113.038 Y109.787 E3.78828
;WIDTH:0.596065
G1 X112.944 Y109.203 E3.81549
G1 X112.819 Y108.939 E3.82892
;WIDTH:0.548032
G1 X112.693 Y108.675 E3.84121
;WIDTH:0.499999
G2 X110.990 Y107.166 I-2.695 J1.326 E3.92977
;WIDTH:0.548832
G1 X110.709 Y107.073 E3.94222
;WIDTH:0.597665
G1 X110.427 Y106.98 E3.95592
G1 X109.837 Y106.96 E3.98315
;WIDTH:0.595402
G1 X109.251 Y107.044 E4.01035
G1 X108.985 Y107.165 E4.02377
;WIDTH:0.547701
G1 X108.719 Y107.285 E4.03602
;WIDTH:0.499999
G2 X107.183 Y108.964 I1.281 J2.714 E4.12459
;WIDTH:0.533708
G1 X107.117 Y109.152 E4.13272
;WIDTH:0.567417
G1 X107.051 Y109.339 E4.14137
;WIDTH:0.601126
G1 X106.985 Y109.527 E4.15062
G1 X106.959 Y110.134 E4.17882
G1 X106.959 Y110.134 F7200
G1 X106.834 Y108.628
;WIDTH:0.499999
G1 F1549
G1 X106.834 Y106.834 E4.247
G1 X108.608 Y106.834 E4.31442
G2 X106.939 Y108.426 I1.295 J3.028 E4.40386
G1 E3.00386 F4800
;WIPE_START
G1 F5760
G3 X107.349 Y107.792 I2.063 J0.885 E2.40386
;WIPE_END
G92 E0
G1 X111.366 Y106.834 F7200
G1 E2 F4800
G1 F1549
G1 X113.167 Y106.834 E2.06845
G1 X113.167 Y108.624 E2.13648
G2 X111.571 Y106.936 I-3.015 J1.252 E2.22666
G1 E.82666 F4800
;WIPE_START
G1 F5760
G3 X112.206 Y107.344 I-0.901 J2.101 E0.22666
;WIPE_END
G92 E0
G1 X111.597 Y113.167 F7200
G1 E2 F4800
G1 F1549
G1 X113.167 Y113.167 E2.05967
G1 X113.167 Y111.363 E2.12823
G3 X111.368 Y113.167 I-3.083 J-1.276 E2.22751
;LAYER_CHANGE
;Z:10.08
;HEIGHT:0.2
; BEFORE_LAYER_CHANGE 49 @ 10.08mm
G1 E.82751 F4800
;WIPE_START
G1 F5760
G2 X112.022 Y112.789 I-0.821 J-2.175 E0.22751
;WIPE_END
G92 E0
G1 Z10.08 F7200
; AFTER_LAYER_CHANGE 49 @ 10.08mm
G1 X114.79 Y114.79
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1659
G1 X105.21 Y114.79 E2.30037
G1 X105.21 Y105.21 E2.60074
G1 X114.79 Y105.21 E2.90111
G1 X114.79 Y114.73 E3.1996
G1 X114.398 Y114.398 F7200
;TYPE:Perimeter
;WIDTH:0.45
G1 F1659
G1 X105.602 Y114.398 E3.49733
G1 X105.602 Y105.602 E3.79506
G1 X114.398 Y105.602 E4.09279
G1 X114.398 Y114.338 E4.38849
G1 X113.991 Y113.991 F7200
G1 F1659
G1 X106.009 Y113.991 E4.65867
G1 X106.009 Y106.009 E4.92885
G1 X113.991 Y106.009 E5.19903
G1 X113.991 Y113.931 E5.46718
G1 E4.06718 F4800
;WIPE_START
G1 F5760
G1 X113.991 Y113.991 E4.01968
G1 X113.293 Y113.991 E3.46718
;WIPE_END
G92 E0
G1 X109.911 Y108.17 F7200
G1 E2 F4800
;TYPE:External perimeter
;WIDTH:0.42
G1 F1659
G3 X109.559 Y108.222 I0.090 J1.829 E2.34921
G1 X109.852 Y108.179 E2.3585
G1 X109.852 Y108.179 F7200
G1 X109.892 Y107.777
;TYPE:Perimeter
;WIDTH:0.45
G1 F1659
G3 X109.465 Y107.839 I0.105 J2.223 E2.81657
G1 X109.833 Y107.785 E2.82916
G1 X109.833 Y107.785 F7200
G1 X109.872 Y107.368
G1 F1659
G3 X109.366 Y107.442 I0.126 J2.631 E3.37141
G1 X109.813 Y107.377 E3.3867
G1 E1.9867 F4800
;WIPE_START
G1 F5760
G3 X110.564 Y107.438 I0.236 J1.745 E1.38670
;WIPE_END
G92 E0
G1 X113.045 Y113.833 F7200
G1 E2 F4800
;TYPE:Top solid infill
;WIDTH:0.432042
G1 F1659
G1 X113.664 Y113.215 E2.0283
G1 X113.664 Y112.665 E2.0461
G1 X112.665 Y113.664 E2.09181
G1 X112.115 Y113.664 E2.10961
G1 X113.664 Y112.115 E2.18049
G1 X113.664 Y111.564 E2.19832
G1 X111.564 Y113.664 E2.29441
G1 X111.014 Y113.664 E2.31221
G1 X113.664 Y111.014 E2.43347
G1 X113.664 Y110.464 E2.45127
G1 X110.294 Y113.833 E2.60545
G1 X110.294 Y113.833 F7200
G1 X110.972 Y112.605
G1 F1659
G1 X109.913 Y113.664 E2.65391
G1 X109.363 Y113.664 E2.67171
G1 X110.073 Y112.953 E2.70422
G3 X109.554 Y112.922 I-0.144 J-1.943 E2.72108
G1 X108.813 Y113.664 E2.75501
G1 X108.262 Y113.664 E2.77284
G1 X109.112 Y112.814 E2.81173
G3 X108.718 Y112.657 I0.185 J-1.037 E2.82552
G1 X107.712 Y113.664 E2.87158
G1 X107.162 Y113.664 E2.88938
G1 X108.362 Y112.464 E2.94429
G1 X108.053 Y112.222 E2.95699
G1 X106.612 Y113.664 E3.02295
G1 X106.336 Y113.664 E3.03188
G1 X106.336 Y113.388 E3.04081
G1 X107.781 Y111.944 E3.10691
G3 X107.538 Y111.637 I0.653 J-0.767 E3.11962
G1 X106.336 Y112.838 E3.1746
G1 X106.336 Y112.288 E3.1924
G1 X107.338 Y111.286 E3.23825
G3 X107.186 Y110.888 I0.931 J-0.584 E3.25208
G1 X106.336 Y111.737 E3.29095
G1 X106.336 Y111.187 E3.30875
G1 X107.083 Y110.441 E3.34291
G3 X107.049 Y109.924 I1.302 J-0.345 E3.35975
G1 X106.336 Y110.637 E3.39238
G1 X106.336 Y110.087 E3.41018
G1 X107.377 Y109.046 E3.45781
G1 E2.05781 F4800
;WIPE_START
G1 F5760
G1 X106.841 Y109.582 E1.45781
;WIPE_END
G92 E0
G1 X112.616 Y110.961 F7200
G1 E2 F4800
G1 F1659
G1 X113.664 Y109.913 E2.04795
G1 X113.664 Y109.363 E2.06575
G1 X112.949 Y110.078 E2.09847
G2 X112.917 Y109.559 I-1.319 J-0.179 E2.11538
G1 X113.664 Y108.813 E2.14954
G1 X113.664 Y108.262 E2.16737
G1 X112.816 Y109.11 E2.20617
G1 X112.667 Y108.709 E2.22001
G1 X113.664 Y107.712 E2.26563
G1 X113.664 Y107.162 E2.28343
G1 X112.459 Y108.367 E2.33857
G2 X112.220 Y108.056 I-0.939 J0.475 E2.35132
G1 X113.664 Y106.612 E2.41739
G1 X113.664 Y106.336 E2.42632
G1 X113.388 Y106.336 E2.43525
G1 X111.952 Y107.773 E2.50098
G1 X111.634 Y107.541 E2.51372
G1 X112.838 Y106.336 E2.56884
G1 X112.288 Y106.336 E2.58664
G1 X111.281 Y107.343 E2.63272
G2 X110.892 Y107.182 I-0.600 J0.898 E2.64639
G1 X111.737 Y106.336 E2.68508
G1 X111.187 Y106.336 E2.70288
G1 X110.451 Y107.073 E2.73658
G1 X109.93 Y107.043 E2.75347
G1 X110.637 Y106.336 E2.78582
G1 X110.087 Y106.336 E2.80362
G1 X109.028 Y107.395 E2.85208
G1 X109.028 Y107.395 F7200
G1 X109.706 Y106.167
G1 F1659
G1 X106.336 Y109.536 E3.00626
G1 X106.336 Y108.986 E3.02406
G1 X108.986 Y106.336 E3.14532
G1 X108.436 Y106.336 E3.16312
G1 X106.336 Y108.436 E3.25921
G1 X106.336 Y107.885 E3.27704
G1 X107.885 Y106.336 E3.34792
G1 X107.335 Y106.336 E3.36572
G1 X106.336 Y107.335 E3.41143
G1 X106.336 Y106.785 E3.42923
G1 X106.954 Y106.167 E3.45751
G1 E2.05751 F4800
;WIPE_START
G1 F5760;_WIPE
G1 X106.418 Y106.703 E1.45751
;WIPE_END
G92 E0
M107
;TYPE:Custom
M104 S0                                    ; Extruder off 
M140 S0                                    ; Heatbed off 
M107                                       ; Fan off 
G91                                        ; relative positioning 
G1 E-5 F3000  
G1 Z+0.3 F3000                             ; lift print head 
G28 X0  F3000
M84                                        ; disable stepper motors
; objects_info = {"objects":[]}
; filament used [mm] = 355.04
; filament used [cm3] = 0.85
; total filament used [g] = 0.00
; total filament cost = 0.00
; total filament used for wipe tower [g] = 0.00
; estimated printing time (normal mode) = 7m 24s
; estimated first layer printing time (normal mode) = 17s

; prusaslicer_config = begin
; arc_fitting = disabled
; autoemit_temperature_commands = 1
; automatic_extrusion_widths = 0
; automatic_infill_combination = 0
; automatic_infill_combination_max_layer_height = 100%
; avoid_crossing_curled_overhangs = 0
; avoid_crossing_perimeters = 0
; avoid_crossing_perimeters_max_detour = 0
; bed_custom_model = 
; bed_custom_texture = 
; bed_shape = 0x0,220x0,220x220,0x220
; bed_temperature = 60
; before_layer_gcode = ; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm
; between_objects_gcode = 
; binary_gcode = 0
; bottom_fill_pattern = monotonic
; bottom_solid_layers = 3
; bottom_solid_min_thickness = 0
; bridge_acceleration = 2500
; bridge_angle = 0
; bridge_fan_speed = 100
; bridge_flow_ratio = 0.85
; bridge_speed = 40
; brim_separation = 0.16
; brim_type = no_brim
; brim_width = 3
; chamber_minimal_temperature = 0
; chamber_temperature = 0
; color_change_gcode = M600
; colorprint_heights = 
; complete_objects = 0
; cooling = 1
; cooling_tube_length = 5
; cooling_tube_retraction = 91.5
; default_acceleration = 0
; default_filament_profile = "Anycubic PLA @MEGA0"
; default_print_profile = 0.20mm NORMAL @MEGA0
; deretract_speed = 0
; disable_fan_first_layers = 2
; dont_support_bridges = 1
; draft_shield = disabled
; duplicate_distance = 6
; elefant_foot_compensation = 0
; enable_dynamic_fan_speeds = 0
; enable_dynamic_overhang_speeds = 0
; end_filament_gcode = ""
; end_gcode = M104 S0                                    ; Extruder off \nM140 S0                                    ; Heatbed off \nM107                                       ; Fan off \nG91                                        ; relative positioning \nG1 E-5 F3000  \nG1 Z+0.3 F3000                             ; lift print head \nG28 X0  F3000\nM84                                        ; disable stepper motors
; ensure_vertical_shell_thickness = enabled
; external_perimeter_acceleration = 0
; external_perimeter_extrusion_width = 0.42
; external_perimeter_speed = 50%
; external_perimeters_first = 1
; extra_loading_move = -2
; extra_perimeters = 0
; extra_perimeters_on_overhangs = 0
; extruder_clearance_height = 20
; extruder_clearance_radius = 20
; extruder_colour = #FFFF00
; extruder_offset = 0x0
; extrusion_axis = E
; extrusion_multiplier = 1
; extrusion_width = 0.42
; fan_always_on = 0
; fan_below_layer_time = 600
; filament_abrasive = 0
; filament_colour = #29B2B2
; filament_cooling_final_speed = 3.4
; filament_cooling_initial_speed = 2.2
; filament_cooling_moves = 4
; filament_cost = 0
; filament_density = 0
; filament_deretract_speed = nil
; filament_diameter = 1.75
; filament_infill_max_crossing_speed = 0
; filament_infill_max_speed = 0
; filament_load_time = 0
; filament_loading_speed = 28
; filament_loading_speed_start = 3
; filament_max_volumetric_speed = 0
; filament_minimal_purge_on_wipe_tower = 15
; filament_multitool_ramming = 0
; filament_multitool_ramming_flow = 10
; filament_multitool_ramming_volume = 10
; filament_notes = ""
; filament_purge_multiplier = 100%
; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
; filament_retract_before_travel = nil
; filament_retract_before_wipe = nil
; filament_retract_layer_change = nil
; filament_retract_length = nil
; filament_retract_length_toolchange = nil
; filament_retract_lift = nil
; filament_retract_lift_above = nil
; filament_retract_lift_below = nil
; filament_retract_restart_extra = nil
; filament_retract_restart_extra_toolchange = nil
; filament_retract_speed = nil
; filament_seam_gap_distance = nil
; filament_settings_id = "Anycubic Kobra 2 Neo-PLA"
; filament_shrinkage_compensation_xy = 0%
; filament_shrinkage_compensation_z = 0%
; filament_soluble = 0
; filament_spool_weight = 0
; filament_stamping_distance = 0
; filament_stamping_loading_speed = 20
; filament_toolchange_delay = 0
; filament_travel_lift_before_obstacle = nil
; filament_travel_max_lift = nil
; filament_travel_ramping_lift = nil
; filament_travel_slope = nil
; filament_type = PLA
; filament_unload_time = 0
; filament_unloading_speed = 90
; filament_unloading_speed_start = 100
; filament_vendor = (Unknown)
; filament_wipe = nil
; fill_angle = 45
; fill_density = 20%
; fill_pattern = grid
; first_layer_acceleration = 2000
; first_layer_acceleration_over_raft = 0
; first_layer_bed_temperature = 60
; first_layer_extrusion_width = 200%
; first_layer_height = 0.28
; first_layer_speed = 50
; first_layer_speed_over_raft = 30
; first_layer_temperature = 215
; full_fan_speed_layer = 0
; fuzzy_skin = none
; fuzzy_skin_point_dist = 0.8
; fuzzy_skin_thickness = 0.3
; gap_fill_enabled = 1
; gap_fill_speed = 100
; gcode_comments = 0
; gcode_flavor = marlin
; gcode_label_objects = disabled
; gcode_resolution = 0.012
; gcode_substitutions = 
; high_current_on_filament_swap = 0
; host_type = octoprint
; idle_temperature = nil
; infill_acceleration = 3000
; infill_anchor = 10
; infill_anchor_max = 10
; infill_every_layers = 1
; infill_extruder = 1
; infill_extrusion_width = 0.45
; infill_first = 0
; infill_overlap = 15%
; infill_speed = 150
; interface_shells = 0
; ironing = 0
; ironing_flowrate = 15%
; ironing_spacing = 0.1
; ironing_speed = 15
; ironing_type = top
; layer_gcode = ; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm
; layer_height = 0.2
; machine_limits_usage = emit_to_gcode
; machine_max_acceleration_e = 2500
; machine_max_acceleration_extruding = 2500
; machine_max_acceleration_retracting = 2500
; machine_max_acceleration_travel = 3000,1250
; machine_max_acceleration_x = 2500
; machine_max_acceleration_y = 2500
; machine_max_acceleration_z = 800
; machine_max_feedrate_e = 80
; machine_max_feedrate_x = 250
; machine_max_feedrate_y = 250
; machine_max_feedrate_z = 8
; machine_max_jerk_e = 10
; machine_max_jerk_x = 10
; machine_max_jerk_y = 10
; machine_max_jerk_z = 2
; machine_min_extruding_rate = 0
; machine_min_travel_rate = 0
; max_fan_speed = 100
; max_layer_height = 0.28
; max_print_height = 250
; max_print_speed = 150
; max_volumetric_extrusion_rate_slope_negative = 0
; max_volumetric_extrusion_rate_slope_positive = 0
; max_volumetric_speed = 0
; min_bead_width = 85%
; min_fan_speed = 100
; min_feature_size = 25%
; min_layer_height = 0.04
; min_print_speed = 25
; min_skirt_length = 0
; mmu_segmented_region_interlocking_depth = 0
; mmu_segmented_region_max_width = 0
; multimaterial_purging = 140
; notes = 
; nozzle_diameter = 0.4
; nozzle_high_flow = 0
; only_one_perimeter_first_layer = 0
; only_retract_when_crossing_perimeters = 0
; ooze_prevention = 0
; output_filename_format = {input_filename_base}-{layer_height}-{print_time}.gcode
; overhang_fan_speed_0 = 0
; overhang_fan_speed_1 = 0
; overhang_fan_speed_2 = 0
; overhang_fan_speed_3 = 0
; overhang_speed_0 = 15
; overhang_speed_1 = 15
; overhang_speed_2 = 20
; overhang_speed_3 = 25
; overhangs = 1
; parking_pos_retraction = 92
; pause_print_gcode = M601
; perimeter_acceleration = 2500
; perimeter_extruder = 1
; perimeter_extrusion_width = 0.45
; perimeter_generator = classic
; perimeter_speed = 150
; perimeters = 3
; physical_printer_settings_id = 
; post_process = ArcWelder.exe
; prefer_clockwise_movements = 0
; print_settings_id = Anycubic Kobra 2 Neo-PLA
; printer_model = 
; printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_MEGA0
; printer_settings_id = Anycubic Kobra 2 Neo-PLA
; printer_technology = FFF
; printer_variant = 0.4
; printer_vendor = 
; raft_contact_distance = 0.1
; raft_expansion = 1.5
; raft_first_layer_density = 90%
; raft_first_layer_expansion = 4
; raft_layers = 0
; remaining_times = 0
; resolution = 0.012
; retract_before_travel = 2
; retract_before_wipe = 70%
; retract_layer_change = 1
; retract_length = 2
; retract_length_toolchange = 1
; retract_lift = 0
; retract_lift_above = 0
; retract_lift_below = 0
; retract_restart_extra = 0
; retract_restart_extra_toolchange = 0
; retract_speed = 80
; scarf_seam_entire_loop = 0
; scarf_seam_length = 20
; scarf_seam_max_segment_length = 1
; scarf_seam_on_inner_perimeters = 0
; scarf_seam_only_on_smooth = 1
; scarf_seam_placement = nowhere
; scarf_seam_start_height = 0%
; seam_gap_distance = 15%
; seam_position = aligned
; silent_mode = 0
; single_extruder_multi_material = 0
; single_extruder_multi_material_priming = 1
; skirt_distance = 2
; skirt_height = 1
; skirts = 0
; slice_closing_radius = 0.049
; slicing_mode = regular
; slowdown_below_layer_time = 9
; small_perimeter_speed = 50%
; solid_infill_acceleration = 0
; solid_infill_below_area = 0
; solid_infill_every_layers = 0
; solid_infill_extruder = 1
; solid_infill_extrusion_width = 0.5
; solid_infill_speed = 150
; spiral_vase = 0
; staggered_inner_seams = 0
; standby_temperature_delta = -5
; start_filament_gcode = ""
; start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28                                        ; move X/Y/Z to min endstops\nG1 Z0.28                                   ; lift nozzle a bit \nG92 E0 \nG1 Y3 F1800                                    ; zero the extruded length \nG1 X60  E25 F500                       ; Extrude 25mm of filament in a 5cm line. \nG92 E0                                     ; zero the extruded length again \nG1 E-2 F500                                ; Retract a little \nG1 X70 F4000                              ; Quickly wipe away from the filament line\nM117
; support_material = 1
; support_material_angle = 0
; support_material_auto = 1
; support_material_bottom_contact_distance = 0
; support_material_bottom_interface_layers = -1
; support_material_buildplate_only = 0
; support_material_closing_radius = 2
; support_material_contact_distance = 0.25
; support_material_enforce_layers = 0
; support_material_extruder = 1
; support_material_extrusion_width = 0
; support_material_interface_contact_loops = 0
; support_material_interface_extruder = 1
; support_material_interface_layers = 2
; support_material_interface_pattern = rectilinear
; support_material_interface_spacing = 0
; support_material_interface_speed = 100%
; support_material_pattern = rectilinear-grid
; support_material_spacing = 2.5
; support_material_speed = 50
; support_material_style = organic
; support_material_synchronize_layers = 0
; support_material_threshold = 10
; support_material_with_sheath = 1
; support_material_xy_spacing = 50%
; support_tree_angle = 40
; support_tree_angle_slow = 25
; support_tree_branch_diameter = 2
; support_tree_branch_diameter_angle = 5
; support_tree_branch_diameter_double_wall = 3
; support_tree_branch_distance = 1
; support_tree_tip_diameter = 0.8
; support_tree_top_rate = 30%
; temperature = 195
; template_custom_gcode = 
; thick_bridges = 0
; thin_walls = 1
; thumbnails = 
; thumbnails_format = PNG
; toolchange_gcode = 
; top_fill_pattern = monotonic
; top_infill_extrusion_width = 0.42
; top_one_perimeter_type = none
; top_solid_infill_acceleration = 0
; top_solid_infill_speed = 120
; top_solid_layers = 3
; top_solid_min_thickness = 0
; travel_acceleration = 0
; travel_lift_before_obstacle = 0
; travel_max_lift = 0
; travel_ramping_lift = 0
; travel_slope = 0
; travel_speed = 120
; travel_speed_z = 120
; use_firmware_retraction = 0
; use_relative_e_distances = 0
; use_volumetric_e = 0
; variable_layer_height = 1
; wall_distribution_count = 1
; wall_transition_angle = 10
; wall_transition_filter_deviation = 25%
; wall_transition_length = 100%
; wipe = 1
; wipe_into_infill = 0
; wipe_into_objects = 0
; wipe_tower = 0
; wipe_tower_acceleration = 0
; wipe_tower_bridging = 10
; wipe_tower_brim_width = 2
; wipe_tower_cone_angle = 0
; wipe_tower_extra_flow = 100%
; wipe_tower_extra_spacing = 100%
; wipe_tower_extruder = 0
; wipe_tower_no_sparse_layers = 0
; wipe_tower_width = 60
; wiping_volumes_matrix = 0
; wiping_volumes_use_custom_matrix = 0
; xy_size_compensation = 0
; z_offset = 0
; prusaslicer_config = end